Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

finish for tansu

Posts

finish for tansu

#1

finish for tansu

Howard Pollack

I have an old tansu that is beaten up and needs refurbishment. Can anyone tell me what a traditional looking finish for it might be? Thanks.

-Howard

Re: finish for tansu

#2

Re: finish for tansu

Mark Mandell - Gone Round In New Jersey

"Tradition" says shellac or lacquer, both solvent-based.

Have you tested the finish? Take a clean paper towel moistened with dna and rub an inconspicuous spot. It you get color on the towel, your finish is shellac. If nothing, retry with a bit of lacquer thinner. If no result again, you probably have an oil finish that can be rubbed down with wool and then a new coat wiped on.

Re: finish for tansu

#3

Re: finish for tansu

Brian Holcombe

You may want to consult Ty Heineken's book or contact Chris Hall of The Carpentry Way.

Re: finish for tansu

#4

JL

Re: finish for tansu  *LINK*


Google ebook

Re: finish for tansu

#5

DIY *LINK*

Mark Mandell - Gone Round In New Jersey

if you have the trees ;)


Urushi Lacquer

Re: finish for tansu

#6

Whatever you use, it should probably be gloss

Dick Coers

I doubt if they used flattening agents when the old tansu were made.

Re: finish for tansu

#7

Clint Searl

Re: finish for tansu

Clint Searl

High end tansu made with zelkova, elm, or chestnut were finished with natural lacquer. Common tansu, often of paulownia, pine, or cypress, were mostly left unfinished.

Re: finish for tansu

#8

Thanks everyone