Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

5 Dec 2016

Good Morning Everyone,

Well, the kitchen island top glue up is officially over. Now comes the hard part of moving it around, flattening both sides, flipping it over, crating it up, and delivering it to the my friends new house that is still under construction.

Here is a shot of the butcher block top with me showing out a bit:


I still need to cut to final length and it's already at the final width and really close to the final thickness. I built it as flat as I could with what I had in my shop already. I hope I don't need to take much off of it to get it flat and clean.

Final work and delivery of it this week...providing that the day job doesn't demand too much of my time this week.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Rash promise

Jerry Gibbs

Told a friend he could build a boat in my shop while we are in FL. This took some serious work on my part to throw out and organize, which was much needed. I could barely shuffle my way through before. Now to keep it that way. Jerry

Re: WC Weekend Accomplishments....

#3

I hope he's a good friend!


Re: WC Weekend Accomplishments....

#4

Accomplishments

Mark Mandell - Gone Round In New Jersey

Got the parts to the Bandini bench sanded to 120 and the seat frame finally fit and glued up.

Got the rest of my daughter's "stuff" sorted, boxed, and stored making room for the twins she's about done hauling around inside. May have Christmas babies.

In going through boxes and such from years gone by, out pops this slightly out of focus photo of my favorite shop helper making sure that I don't miss a spot on that table leg.


He was a special guy and I still miss him. :)

Re: WC Weekend Accomplishments....

#5

Zounds; and feeling left out

John K Jordan

Yowza, that's some chunk of wood, the widest counter top I've ever seen! Must be a huge kitchen. Just for fun, maybe you chould deliver it with some long-reach grabbers to access stuff in the middle... :-)

>>>That's it for me, so what did YOU do this past weekend?

I just realized your weekly thread may discriminate a bit against one group of WoodCentral members, those fortunate members in the esteemed Retired club. I've been retired 10 years now and I just realized I tend to do very little with wood on weekends. Weekends are usually packed with various non-shop interactions with those poor creatures who unfortunately have to go to work most of the week. I am, however, turning Christmas presents for kids this morning.

You look WAY too young to join the Retired club any time soon. Maybe you can include weekday accomplishments in some series in the far future! Or maybe we can just consider accomplishments over the extended 7-day weekend...

I do enjoy reading about what other people are doing. Thanks. :-)

JKJ

(PS, for some reason some of my friends are not thrilled to be reminded that some of us don't spend all week at the day job, especially when they think I might be rubbing it in a tiny bit. I don't understand...)

Re: WC Weekend Accomplishments....

#6

Ellis Walentine

Whew, what a counter top!

Ellis Walentine

Hey Dennis,

How did you get glue on all those joints in time? And how will you flatten that thing? Handplanes??

Remarkable project, nice work.

Ellis

PS I spent the weekend spackling and painting our bedroom. Not nearly done yet. I also overhauled my shop stove and fired it up for the first time this season. With luck, I'll wedge in a couple Christmas presents between now and the 25th. Then I clear the decks to build cabinets and vanities for our new house. Gonna be an action-packed winter around here.

Re: WC Weekend Accomplishments....

#7

Renting a space or have room?

Gary Smyth

Big time project. How do you intend to arrange (indoor) space for the tools, raw materials, the build, the storing of the completed, and the finishing? Will cold, dampness cause concern?

Re: WC Weekend Accomplishments....

#8

Re: Zounds; and feeling left out

William Duffield

I have a similar problem. Weekdays and weekends all seem to blur together. My wife still works, but since she works from home, and tends to work weekends as well as weekdays, what she is doing doesn't give me the clues I need to put together a report for this feature. I'm guessing most people here aren't very interested in what we've recently accomplished that is not woodworking related, but if it involves sawdust, I think we should encourage everyone to report anything accomplished, and @*%&^#$ the schedules. :D

So, have I accomplished anything? I've attended a woodworking organization board meeting where I think we made some decisions, I've supervised work being done on my house by a paid carpenter/painter, and I've made some progress on some woodworking designs. I suppose I could just say the process and the journey are more important than the results, but I still think I would be happier if I finished making something.

Re: WC Weekend Accomplishments....

#9

Re: Zounds; and feeling left out

GarthinSanDiego

A friend of mine explained prior to my retirement that it is easy to loose track of time once retired

. His suggestion was simple. Every day of the week is Saturday, except one. On that day you get a big newspaper. That day is Sunday.

Re: WC Weekend Accomplishments....

#10

Jesper, Denmark

Re: Retirement move finalized......

Jesper, Denmark

My house with the 1000 sq. ft. shop sold, firm contract and the purchase price in escrow. Sliding take-over starting 1. January and closing on 1. February.

All of the woodwork related projects for the new apartment are essentially finished. (Do they ever completely finish???)

The lathe and sharpening system is donated to the local senior center workshop, so I can still use it - 1/4 mile walk. That move will happen after New Year.

All of the flat work machines put up for sale, and some have already sold.

This was a hard decision, giving up space and convenience of having all the quality tools handy to the living space, but I have finally accepted this as the right solution. Spacious apartment right in town with no maintenance and relatively simple access to the senior shop.

Now I just need to figure out where to store the collection of rough turned bowls and turning blanks??

Re: WC Weekend Accomplishments....

#11

Re: WC Weekend Accomplishments....

Marc in Mass

Sand it with a floor sander Dennis?