Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Disc Sander Wiring

Posts

Disc Sander Wiring

#1

Disc Sander Wiring

Stuart Johnson

The run capacitor on my Laguna 20" disc sander blew. After getting no help or even acknowledgement from Laguna I was able to purchase a similar but larger replacement from Granger. I will need to build a new box to hold both the start and run capacitors but that isn't my problem.

I took photos prior to disconnecting everything but somehow deleted them. The attached shows the wiring diagram (right set) and a photo of the box. The top row of the wiring from left to right: W2 U2 V2, the bottom is U1 V1 W1.

Am I correct in connecting the hot to the W2 U1 strip, with the run capacitor connecting to the same strip and W1?

I realize I have to make some repairs to eliminate the burned wire (the hot melted in two).

Re: Disc Sander Wiring

#2

Re: Disc Sander Wiring

Bill Howatt

Yes. That's what the diagram shows.

Bill