Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Looking for a source for custom sanding belts?

Posts

Looking for a source for custom sanding belts?

#1

Looking for a source for custom sanding belts?

Keith Newton

I'm needing to order some belts for my edge sander, which uses 6" x 19', so not a common size. I like to compare some offerings and pricing, and maybe deal with a knowledgable person.

Re: Looking for a source for custom sanding belts?

#2

Re: Looking for a source for custom sanding belts?

Henry (Raleigh NC)

Keith

I have not ordered custom sized belts, but Klingspor's (an advertiser here I believe) does sandpaper quite well. Lots and lots of choices.

We in NC are fortunate to have several retail stores that sell sandpaper 'offcuts' by the pound (great for hand sanding at the lathe).

From their commercial accounts webpage:

KLINGSPOR Abrasives, Inc

2555 Tate Blvd SE

HIckory, NC 28602

Phone: 800-645-5555

Their retail division is separate, but also likely easy to find online.

Henry

Re: Looking for a source for custom sanding belts?

#3

Second that

Thomas Skaggs, Foothills of Mount Level

I get all abrasive belts from Klingspor. Excellent customer service. Custom sizes are no problem.

T.

Re: Looking for a source for custom sanding belts?

#4

THanks, I gave them a call, but after hours

Keith Newton

I had already tried finding a place where I could figure it on their site, but gave up and called but got the after hours answering service.

Re: Looking for a source for custom sanding belts?

#5

Fast Delivery

Thomas Skaggs, Foothills of Mount Level

Keith,

I'm usually impressed by how fast I receive my orders from them. Call tomorrow and you might get them sooner than you think.

T.

Re: Looking for a source for custom sanding belts?

#6

Local rep was here by 9:30

Keith Newton

He gave me some samples to try for other tools, and got my order, so I guess that is pretty fast service. I even got a free cap.

Re: Looking for a source for custom sanding belts?

#7

Re: Local rep was here by 9:30

Thomas Skaggs, Foothills of Mount Level

Free cap? Geez, I have been ordering from them for years and I never got a cap! Lucky you!

T.

Re: Looking for a source for custom sanding belts?

#8

You can have this cap, I'm STEAMED

Keith Newton

I've been trying to contact the rep for several days, and he won't even return my call. Finally I called the Home office today, the number Henry gave, but since they couldn't find anything on me, sent me to the other number, which wasted an hour, until finally the day was gone, and I'm not sure I'm going to get belts this week.

Did I mention that my last belt was as smooth as a catfish belly? Plus, if I'm a day late on my delivery deadline, i loose $1000.oo

Re: Looking for a source for custom sanding belts?

#9

Re: You can have this cap, I'm STEAMED

Thomas Skaggs, Foothills of Mount Level

Bummer. I have never dealt with a rep there. I just call the 800 number and a nice lady always takes care of me. Coincidentally, I just placed an order yesterday and she said it will ship tomorrow (they had to make some custom sizes for me)

I hope you get your order soon!!

T.

Re: Looking for a source for custom sanding belts?

#10

Re: You can have this cap, I'm STEAMED

Keith Newton

Well, I tried getting it all set up to order online, but something was going on either on the web, or my computer. I could only see about half of each page, so first called the 0000 number, then the 5555 number that Henry shared. They gave me the rep #, and he came by right away.

He seemed great to deal with, gave me samples, and left with over $300 order and my credit card # to expedite speeding it through, then POOF!!!! I have no idea where he has gone, but it was a big let-down to me. I've been trying to contact him for days, with no response.

Then today, I'm sure I've wasted 2 hours trying to get something on the way, and I'm not real sure I've succeeded yet.

I don't want to talk badly about a sponsor to this site, but I'm not sure they are going to get my business after this. Maybe they can find a way to keep my business, but I've found another source that I've placed an order with just for insurance.

Re: Looking for a source for custom sanding belts?

#11

Re: You can have this cap, I'm STEAMED

Joseph Mulherin

Keith, contact Ellis and see if he can facilitate the delivery of the belts

Re: Looking for a source for custom sanding belts?

#12

Re: Not a good idea though the intention was good

North of the Border

When did a site owner become a liasion person for the site's sponsors? While it is ok for a forum owner to offer advice or contact information, it is not his or her job to intervene in any business issues between a forum visitor and any sponsor.

Re: Looking for a source for custom sanding belts?

#13

Rick L

Re: Industrial abrasives

Rick L

Forget The rest and go with the best. Lowest minimum on custom sanding belts and half the price of Klingspor and just as good of quality

Re: Looking for a source for custom sanding belts?

#14

Re: Industrial abrasives

Keith Newton

Thanks Rick L, I think that is who I've bought from in the past, but I just couldn't find my link, and as I stated earlier, either my computer was messing up, or the internet connection, so I just went for the phone. i have run my computer disk repair a couple of times, and unplugged all the other stuff, so back up to speed.

I've got them bookmarked now.

Yesterday afternoon, I finally got to a sales manager at Klingspore, who promised to get me a free sample off and let me know. But mid morning, I hadn't heard anything, so order a couple from Econaway Abrasives, and got confirmation from UPS that they are on their way, next day air, so at least I'll have them tomorrow, for this weekend, a week later than I really needed them.

Re: Looking for a source for custom sanding belts?

#15

Re: You can have this cap, I'm STEAMED

Coleman Fourshee

Hi Mr. Newton,

We are trying to understand all that went on here but if possible, please email me your full address and phone number to cfourshee@woodworkingshop.com. We as a company need to see what happened and any help would greatly be appreciated.

My division is the woodworkingshop.com which is a sponsor of this site. Our Industrial side is Klingspor.com and we both are interested to see if we can settle what happened and why. Most importantly, call me - 1-800-228-0000 ext. 3737 or email me sizes and I will get belts to you asap.

Coleman

Re: Looking for a source for custom sanding belts?

#16

Re: You can have this cap, I'm STEAMED

Keith Newton

Sorry I didn't see this before probably your closing time there, but I just tried your phone anyway. And guess what, the message I got was that extension 3737 is not a valid number. I'm sure I must be doing something wrong, to always be getting the runaround.

Re: Looking for a source for custom sanding belts?

#17

Very Disappointing!!

Thomas Skaggs, Foothills of Mount Level

Keith,

I tried calling that guy's number to see if it was "just you". Rest assured, it's not just you! He gave a bogus extension number. I feel frustrated for you. Klingspor has provided me good service in the past but this situation is an epic fail for Klingspor. I am sorry you are having this terrible experience.

Personally, I think Klingspor owes you your order.....GRATIS.

T.

Re: Looking for a source for custom sanding belts?

#18

Thanks for the feedback Thomas

Keith Newton

I was starting to wonder if this was what loosing my mind would be like. I think I'm communicating with someone, but then absolutely no progress is made, and I've run up against a wall again wondering what happened.

Re: Looking for a source for custom sanding belts?

#19

Re: Thanks for the feedback Thomas

Coleman Fourshee Sr.

Oh my!!

In complete frustration shared with you over this craziness, I did give out the wrong extension..... WOW. I am so sorry, please call me at 1-800-228-0000 ext. 3700. My mistake is that I gave our PO BOX number instead of extension. I AM SO SORRY.....

For your information: We finally tracked down some of this and all I can say is sometimes stuff rolls downhill the more you try to help. You are however getting a 6" x 228" 100 grit belt sent from our catalog/web division today.

Coleman Fourshee Sr.

GM- Klingspor's Woodworking Shop

800-228-0000 ext 3700

cfourshee@woodworkingshop.com

Re: Looking for a source for custom sanding belts?

#20

Hey, I finality got a package

Keith Newton

One went straight on the stroke-sander and went in use immediately.

I was impress to read on the sticker that it was made in a SOLAR powered factory, cool. Although I wondered if that was where the belt was made, as well as your local shop where the belt was cut to length and spliced.

Just in case I forgot to say so earlier, thanks for giving your support to WC.