very cool work. is it just my imagination. but on the second to last picture, that surface looks very reflective. is it just that smooth form the hand plane work or jsut a factor of the wood and lighting?
Your recount shines a lot of light on the kinds of decisions we make when converting wood. Harvesting, flattening and prep work are key. You've illustrated your methods nicely. Thanks.
Thanks Ellis! Sometimes it's easy to forget how much thought goes into slab selection once we get going on the project, I had to take account before forgetting.
I've only done work with live edges on a much smaller scale (turned bowls and handles of serving tools), but I've always tried to preserve much of the bark whenever possible. I know this is often not practical, especially if there are live beetle grubs still at work. Even if the bark is loose in places, I try to reattach it with epoxy, clean out whatever detritus has been captured, pick out loose bark and bugs, and fill and coat it with epoxy. I think keeping the bark adds a lot of meaning to the concept of "live edge."
My thoughts on live edge are that it is the furniture equivalent of 'peeled post' timber frame. In Japanese timber work it is common for a major beam to be left in its free form. Typically the bark is removed and the edge will be shaved down to clean wood. They're sometimes left round and other times two sides are flattened leaving the edge profile.
Live edge makes the most sense to me in that context of timber work, the physicality of the tree remains in abstract form, but is heavily influenced by architectural supports and purpose.