Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Air quality (in the shop?)

Posts

Air quality (in the shop?)

#1

Air quality (in the shop?)

John K Jordan

I have a Dylos air quality monitor which uses a laser to count particulates in the air in two ranges, above and below 2.5 microns. I got it out the other day to see how the dust collection was doing while sanding at the lathe.

I was surprised and concerned to see a very high small particle count between 4000 and 5000 even with nothing running. It is usually not far from 100-200. The count stayed high for days. At first I thought it must be broken. I suddenly realized it must be counting smoke particles from the forest fires in the Southeast, even though the shop is closed up fairly tight.

When a cold front and some rain went through and the wind changed, it was back down to low values. No wonder my breathing was affected!

It made me wonder how it was in places closer to the fires. Anyone having breathing problems?

JKJ

Re: Air quality (in the shop?)

#2

Re: Air quality (in the shop?)

TomD

Fascinating! I always say that I have never regretted anything I have bought that measured something, well other than that RC tester that didn't work. :)

Re: Air quality (in the shop?)

#3

Re: Air quality (in the shop?)

John K Jordan

>>>Fascinating! I always say that I have never regretted anything I have bought

>>>that measured something, well other than that RC tester that didn't work

We think alike. Around the time I bought the air quality tester I went on an instrument acquisition binge and picked up an ambient light meter, a duel-channel thermocouple reader, current meter, some lab thermometers, wind speed gauge, a sound meter, a voltage/current/frequency reference, precision scales from sub-gram to livestock, pressure and vacuum gauges, a reflective RPM meter, a digital oscilloscope, an infrared thermometer, various Starrett things with dials and readouts and scales, and some misc Fluke things including an 87-v multimeter (my favorite thing). Added to the surveying things, laser distance meter, long tapes, and level collection, life is measured. Life is good.

Now where can I find a mass spectrometer and a good geiger counter?

JKJ

Re: Air quality (in the shop?)

#4

Re: Air quality (in the shop?) *LINK*

Mark Hennebury

http://www.ebay.com/bhp/geiger-counter

I am looking for an autocollimator


Mass Spectrometer

Re: Air quality (in the shop?)

#5

Re: Air quality (in the shop?)

John K Jordan

Wow, a data logger with gamma and beta for about hundred bucks, I had no idea they were so cheap.

JKJ