Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Castor Depot/Great Lakes Castor Review

Posts

Castor Depot/Great Lakes Castor Review

#1

Castor Depot/Great Lakes Castor Review

Darita

I've been asking a lot of questions about how to, etc., concerning leveling castors, so I thought I'd post the end result, as someone will probably have the same questions that I had about mounting this type of leveling castor to an MM16 bandsaw.

First, as I understand it, Great Lakes Castor is now Castor Depot. On earlier posts, there was talk that GLC had Zambus type castors that were a fraction of the cost of the Zambus. They did, but apparently no longer do as they were much less duty. Now they carry a very close match to the Zambus leveling castor, called Footmaster. After speaking with Jason Popma at Castor Depot, I ended up with Footmast Model GD-60S leveling castors. I'll spare you the specs, only mentioning that they are rated at 550lbs/ and have an M12 thread to mount with. These things are a little smaller than the size of my fist, very heavy duty and very nicely finished.

So, my main questions were about how to mount these suckers to the base of the MM16. The other example I saw was an MM20, but there seems to be a slightly different configuration of what's under the base. On the MM20, you simply have to use the existing M12 leveling screws and screw them into the threaded Footmaster castors...easy. Of course with my MM16, it's a bit more complicated.

You will see by the pics that I had to gain working access to the bottom of the base, drill mounting holes, then I could mount the Footmasters to the base. Using this method actually allowed me to get the castors mounted a bit further apart, so that added stability.

Now that the Footmasters are mounted, the saw rolls and turns so easily, it's amazing. I have a garage shop, where space is at a premium and every nook and cranny is used. Whenever I have to use the saw, I have to maneuver it out of it's storage space. With the OEM setup, that maneuvering was a real pain. Now, it's no sweat at all. Once in place, lowering the feet is easy enough to do with fingers...I was pretty surprised about that.

I'm glad I finally made the switch from OEM to these Footmasters. Hardest part by far, was laying the saw down to work on. Now I have to figure out which Footmaster castors to use on my FS30 Smart, Jointer/Planer. Thanks for looking.[URL=http://s63.photobucket.com/user/derekarita1/media/IMG_0972_zpszmfqfud1.jpg.html][/URL][URL=http://s63.photobucket.com/user/derekarita1/media/IMG_0968_zpsimcf4qor.jpg.html][/URL][URL=http://s63.photobucket.com/user/derekarita1/media/IMG_0975_zpss5jjohre.jpg.html][/URL][URL=http://s63.photobucket.com/user/derekarita1/media/IMG_0973_zps5gvxxta2.jpg.html][/URL]

Re: Castor Depot/Great Lakes Castor Review

#2

JL

Thanks

JL

I guess I can get rid of a mobile base or two.

This would lessen the footprint on my Rikon band saw.

Not sure if it will work w/ my Delta as it is fairly old.

Re: Castor Depot/Great Lakes Castor Review

#3

Re: Castor Depot/Great Lakes Castor Review

Martin from Texas

You said you needed to drill new holes.

Did you have to thread them as well?

Or did you put the wheels on with a nut and bolt?

Thanks for posting this, I need to do the same to my bandsaw.

Re: Castor Depot/Great Lakes Castor Review

#4

some more information please

Bill Tindall, E.Tn.

I am unfamiliar with this kind of caster. Do all 4 swivel? I gather the wheel is adjustable height....how? Do they lock in place securely?

Re: Castor Depot/Great Lakes Castor Review

#5

Some more information *LINK*

Mark Mandell - Gone Round In New Jersey

I put these on my Stubby 1000 which I must keep in the garage. Got mine from McMaster and, with a load rating of 300lbs each, they handle my 800+lb lathe easily. They each have a cogged thumb wheel that lowers or raises the leveling block; the wheel is fixed. Lathe is positioned, blocks are lowered, and the lathe is rock solid for turning.

Examples at various capacities and prices at the link.


McMaster

Re: Castor Depot/Great Lakes Castor Review

#6

Re: Some more information please

Darita

Just what Mark said. All swivel and are great for moving heavy machines, even past the deep seams in my garage floor. Once in place, you lower the leveling feet by turning the notched wheels and yes, they can be turned by hand. Nice part is, unlike other comparably priced mobile bases, these keep the footprint of the base to a minimum.

Funny you should ask about the mounting holes...he said sheepishly...I originally intended to drill and tap the holes, so that I could simply screw the castors in, still backing them up with the provided nuts. That said, I am a horrible machinist and always have problems drilling and tapping. I don't think I have the proper sized drills, so that made tapping difficult and as a result, my first attempt ended up with a crooked, tapped hole. That obviously wouldn't suffice, so I drilled out the hole and used the nut to mount the castor.

Initially, my only reservations were, whether or not the castors could roll over the floor's grooved seams and how stable the saw would be with the smaller footprint. Well, the castors roll easily over the grooves, so no prob there. If you think about it, the saw is as stable as the manufacturer intended it to be, as the castors are positioned at the outermost corners of the base. That said, one must take care when moving anything that tall and heavy, but when you do move it, it's ease of movement makes it safer, because there's much less pulling and pushing on the machine. To me, the leveling castors are much safer to use than the OEM Johnson bar mobility kit.

These castors are industrial duty and solid as rock. If you have a heavier machine, there are several heavier duty leveling castors in the lineup. Unfortunately, my Jointer/Planer does not have a solid under-base, so I'll have to figure out how to mount castors to it. If I can figure that out, I'm now sure that these Castor Depot castors are the way to go for easy moving around my garage shop.

Re: Castor Depot/Great Lakes Castor Review

#7

Re: Castor Depot/Great Lakes Castor Review

Rum

They are really nice. The foot drops down in alignment with the mounting post which really locks them nicely in place.

I made a bit of a homemade platform under my bandsaw to use them and reckon the same idea should work for your other tools..

If you do a google image search for "zmabus bandsaw" there are lots of good ideas.

In my case it was basically just 4 pieces of square tubing from the big box store bolted together (and then bolted to the saw).