Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

14 Nov 2016

Good Morning Everyone,

I've really enjoyed having the bowling alley work done and I'm actually working on the LOML Jr's blanket chest that she and I started 2 years ago. She didn't want me working on it because she wanted to work with me on it...but as usual, life changes, time gets away from us all, and she has a baby to tend to now. So, I made the command decision to get busy and finish the blanket chest. If all goes well, I'll be 95% finished with it by tonight (including assembly).

A church friend of mine from a few years back contacted me and wanted me to build an island top for their new house that is currently being built. The top is to be one piece and final length is to be 10 feet long. The width of the top is to be 56 inches wide and the material is to be a mixture of domestic hardwoods with no specific pattern to the top. This will be my biggest project ever and the most expensive in material costs. So, if you have any tips and pointers about building a top this big.....Oh, and it has to be 2.25" thick. :) I'd love to hear from you for tips and pointers. I need to use cauls on this project but I've never made cauls before, so I'm a bit unsure about making them.

Back to oncall duty starting today and my hope is that it all goes very well this week.

That's it for me, so what did YOU do this past weekend.

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Call the ball *LINK*

Gary Smyth

With an island that size you're going to need a Optical Landing System (OLS) and arresting cables. That island is 2/3 the size of my whole kitchen. Good score. Show us when finished.


https://www.quora.com/What-does-it-mean-to-call-the-ball/

Re: WC Weekend Accomplishments....

#3

Given the size and weight

John in NM

Of that top, I would suggest the radical approach - glue up in place and finish with a scrub plane followed by a jack or try plane and then a smoother...

All I did this weekend is make some molding for a project of my wife's and a couple other small jobs like that. Work's been keeping me busy enough that I don't really want to do much on the weekend :D

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Hank Knight

Mostly I watched a lot of football. After a brief glimpse of glory the last couple of weeks, South Carolina reverted to it's traditional style, losing badly to Florida; and Clemson lost to Pitt by one point to a last second field goal. Bad football weekend for the Palmetto State!

I did, however find some solace in the workshop. I repaired an antique kitchen chair with two broken rungs, and I started work on a shooting board for long miters. I saw this one online several months ago and thought it looked a lot better than the jig I'm currently using :

[URL=http://s50.photobucket.com/user/hankknight/media/Workshop/IMG_0508_zpschzltpja.jpg.html][/URL]

I got a good start on it over the weekend. I haven't figured out how to build in a lot of adjustability, so getting it assembled with the close tolerances necessary for a shooting board is going to be tricky.

Hank

Re: WC Weekend Accomplishments....

#5

Re: Shooting Board

Ron in Sterling, CT

Hi Hank,

I built one very similar to that several years ago. It is not as fancy, but it really works great for truing up miters. Accuracy of assembly is the key. Good Luck.

Ron

Re: WC Weekend Accomplishments....

#6

Re: Shooting Board

Hank Knight

Thanks, Ron. I'd apperciate any assembly tips you might have. I'm trying hard to keep everything as square as I can possibly make it. We'll see how it goes.

Re: WC Weekend Accomplishments....

#7

I have one like it

Bill Tindall, E.Tn.

Works great. I shim the piece to be mitered if I need to adjust anything. It is more straightforward than diddling with the fence.

BTW, yours looks much prettier.

Re: WC Weekend Accomplishments....

#8

Re: Shooting Board

Ron in Sterling, CT

Hi Hank,

I glued every thing in place and let it set up before I tried to install the screws.