Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

7 Nov 2016

Good Morning Everyone,

I'd like to state that I had a really good week off from the day job. I got lots of things done around the house and the final touches finished up at the bowling alley. Needless to say, I'm ever so glad to have that finished. The LOML and I spent some time working on cleaning up the shop and made some good progress. The cooler temps here make a huge difference in how much we can get done without being so blasted hot and humid. Love this time of year. Now I just need to work on getting the rest of my shop cleaned up and better organized to see what shakes out of all that.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Spent time with my daughter and saw cool stuff

Grant Smith

I took a much needed week off of work and visited my daughter and Son in law in Wichita. We had a great time playing games, fixing a few things, and just spending time together.

We went to the Sedgwick County Zoo in Wichita, where I bonded a bit with the Orangutans by showing them smart phone video of other orangutans, squirells, etc. We seemed to have a lot in common. I wasn't as popular with the Silverback Gorilla, who charged me and bared his teeth. A very nice zoo and much to see and do.

We went to "Stratica", the salt mine and took the expanded tour, which was quite informative and fun, while being eery.

Perhaps the highlight of what we experienced together was the Cosmoshere in Hutchinson, KS. I was in heaven before we even walked in the door when we saw the first "T.I.V." from the stormchasers show sitting int he parking lot. A few space race rockets were on display outside. We went inside to see the museum, but were instantly distracted by the SR 71 Blackbird on display. As we walked around it to look it over and marvel at its coolness, a well groomed older gentleman walked up and asked if we had any questions. Of course I did, and around 15 minutes in to our conversation, he revealed that he was Retired Col. "Buz" Carpenter, and had flown many missions in this particular plane. It was luck that he was there, as he lives in California, but he spoke to the three of us for around an hour, wowing us with details we might have otherwise thought classified information. He talked about how the SR used celestial navigation, and spoke of the missions he had flown. A very approachable man who has a passion for flight and our country. I learned later that he had done many other amazing things in his career.

I had a wonderful week with lots of bonding and relaxing. I will close with a link to Col. Carpenters bio:

http://roadrunnersinternationale.com/carpenter.html

Regards,

Grant in Iowa

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Gary Smyth

Mr. popularity what with all the political phone calls.

Busy, went all out completing functional stuff while racing cold weather when garage space will shut down. Two weeks till Thanksgiving, six till Christmas, and only about four until first snow.

FINALLY! Got two of my bulkiest, heaviest, more used tools, Rockwell 31-355 (1x42) and Craftsman 225950 (6x48 w 9” disc) off the floor. Total tool weight 120 lbs., and tired of tripping over/lifting/moving them. Utilitarian cabinet has twelve total AC outlets, minimal cable exposure, and out of the way storage for extension cords and sanding/grinding belts, discs, rolls and drums. Sacrificed the radial arm saw and stand for the space but the radial didn’t provide enough use vs. space. By the way, if you have an Ikea nearby, their task lighting, bath/kitchen hardware is well made, sleek, plentiful, and half the cost of online more searched go-tos.

Also completed a ½” conduit adhesive tape rack (already full) and a more efficient and experimental torsion box miter saw platform/top with primitive dust capture also using electrical conduit to support a soon coming shake out canvas curtain. Got the rolling paint storage cabinet shelves ready for work.

Started to repurpose a $10 seven foot tall broom cabinet to a “quick grab” pantry for some most used food like pasta, rice, sauces, soup, canned goods, packets for gravy, salads, etc.

Made a massively good BLT.


Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Doug Reynolds

Members of my woodworking guild (www.EWWG.org), with the assistance of Wood Centralite Rich Pearson, completed 35 toy delivery trucks for charity from Toys and Joys plans.

This is our first charity build which I hope we can continue.

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Joseph Mulherin

Good morning all: this past week I have constructed my shop air cleaner to be hung over the floor to the rafters. It has five filters....three in and two out. Went to a local HVAC shop and the man just gave me a furnace blower they had removed earlier in the month.....for FREE. tested it out and it ran correctly on all three speeds. Made the box, then installed the blower and secured all around. Am trying to figure out how I am going to raise it up and secure it to the rafters. Looked at HF to find a block and tackle....reasonable cost, but have to have rigging straps on both ends to connect with the tackle, then raise it up and try to hold while I secure it with slotted angle irons and screws.

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

John Veerkamp

Maybe rent a sheet rock jack for an hour.

Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

Paul Cates - Henderson, KY

Nice job on the cabinet. Do you remember where you purchased the hooks for the extension cords on the back? I have searched for cord hooks and cord hangers but haven't found any similar to yours.

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Joseph Mulherin

Good idea, but garage door does not open and there is no room to maneuver it around.

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Joseph Mulherin

Decided to install wheels and keep it on the floor.

Re: WC Weekend Accomplishments....

#10

Re: WC Weekend Accomplishments....

Joseph Mulherin

Noticed on YOUTUBE where a guy installed his own air cleaner by himself using ring eyebolts in the ceiling rafters and "s" hooks in four sides of the cleaner and lots of chain. He raised the cleaner about 12" on each end, re-hooked the chain to the higher level then went to the other end and raised it up 24" and re-positioned the chain again until he had the cleaner up against the rafters , then hooked the cleaner with"s" hooks to the ring eye bolts in the rafters. Done....and all by himself with no help....good job.

Might consider doing that myself

Re: WC Weekend Accomplishments....

#11

Jim DeLaney, Austintown, Ohio

Re: WC Weekend Accomplishments....

Jim DeLaney, Austintown, Ohio

That's pretty much how I installed mine (a Jet), except that when I got it all the way up, I removed each chain and replaced it with a 3" carabiner.

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments....

Joseph Mulherin

Yes, Jim, the carabiners would do a good job. Have you considered that the whole weight is be installed

held up with just the power of the screws on the bolts etc. That is the reason I want the cleaner to

be installed on my cleaner with 9" of slotted angle iron and flat headed screws into the sides and the rafters. A piece of pipe insulation at each rafter to silence any rattle noises.

Re: WC Weekend Accomplishments....

#13

Jim DeLaney, Austintown, Ohio

Re: WC Weekend Accomplishments....

Jim DeLaney, Austintown, Ohio

I did consider that, Joe. The eye screws are 3/8" diameter, with 3" of screw length. They're screwed into the ceiling joists, through plaster, so they each penetrate the 2 X 8 joist by about 2½ inches.

The air cleaner, while heavy to manhandle up there, is really only about 70 pounds, so each bolt is holding less than 20 pounds. (assuming equal weight distribution)

The cleaner has been up there for several years now, and there's no indication that any of the connectors are straining, so I'm pretty confident it'll stay there.

Re: WC Weekend Accomplishments....

#14

Re: WC Weekend Accomplishments....

Joseph Mulherin

Am going to raise the air cleaner with my 6' come-along; raise it up using the 3/8" rope i have coming on the 14th ....up to the saw table height making a good sling around the cleaner with the rope, double wrapping, and then raising it up with the come-along to the rafter height tightly and install the slotted angle irons I cut

to permanetly hold it using screws.