Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Anybody know/use Sherwin Williams Lacquer?

Posts

Anybody know/use Sherwin Williams Lacquer?

#1

Anybody know/use Sherwin Williams Lacquer?

Barry Irby

I need some Lacquer to finish beds I am building for my Granddaughters. Sherwin Williams has CAB Acrylic Lacquer. Anybody used it? Good or bad. I will be spraying it one cherry.

Any better Ideas?

Re: Anybody know/use Sherwin Williams Lacquer?

#2

Clint Searl

Re: Anybody know/use Sherwin Williams Lacquer?

Clint Searl

It's my favorite. In Medium Rubbed sheen.

Re: Anybody know/use Sherwin Williams Lacquer?

#3

Re: Anybody know/use Sherwin Williams Lacquer?

Thomas Skaggs, Foothills of Mount Level

I have used it. Medium rub is nice but I sometimes want to mix a little semi gloss in to brighten the finish. Oddly enough, our local Sherwin Williams tells me that only medium rub comes in a gallon. All others come in 5 gallon. Grrr!

Nowadays I am using Magnalac and I really like it.

T.

Re: Anybody know/use Sherwin Williams Lacquer?

#4

Re: Anybody know/use Sherwin Williams Lacquer?

Bill Tindall, E.Tn.

It doesn't yellow like nitrocellulose lacquer. It has a bright luster. At one time it was used on high dollar pianos, and may still be.

Re: Anybody know/use Sherwin Williams Lacquer?

#5

Re: Anybody know/use Sherwin Williams Lacquer?

Chuck Jurvelin

I have used SW medium rub hi-build precat for years. I have tried others, but this is my finish of choice. I have sprayed many gallons of it and it has looked great and held up great.

Re: Anybody know/use Sherwin Williams Lacquer?

#6

Re: Anybody know/use Sherwin Williams Lacquer?

Larry Copas

When I built our house I probably shot 50 gallons of dull rub SW CAB-acrylic lacquer. To be exact T75F18. My procedure was to shoot the required vinyl sealer (T67F6) wait 20 or 30 minutes and sand with Scotch Brite. Next step was to shoot two coats of lacquer. No thinning, and the lacquer laid down beautiful. After four years I have no regrets.

I also sometimes shoot SW CAB-acrylic lacquer T75C15 which is gloss. I use it on wood turnings as like the rest of the CAB-lacs it goes on clear and remains clear (no yellowing). I break SW guidelines as far as film thickness and shoot multiply coats. It is a good arrow to have in my quiver.

Re: Anybody know/use Sherwin Williams Lacquer?

#7

Re: Anybody know/use Sherwin Williams Lacquer?

AZ in Colorado Springs

It's excellent stuff.