Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

31 Oct 2016

Good Evening/Morning Everyone,

It's been a hard week but a good week. Work has been "work" and I can now say that I've finished the work we agreed to at the bowling alley. New ball racks made and installed and I'm happy to say that I'm pleased. :)

I'm off work this week and my plan is to enjoy it and get the blanket chest finished for the LOML Jr that was started almost 2 years ago. Life and time gets away from me now days and seem like time keeps getting faster and faster with every passing year. I've heard that time flies when you get old...I guess I'm getting old because time sure does fly...or seems to anyway.

A friend of mine has asked me to make an island top for their new house that they are getting built. I priced it "high" and still got it. The island top is to be 56" wide by 120" long by 2.25" thick. It is to be made from various species of domestic hardwoods and in no specific pattern. I simply don't know how I get myself into these things, but I just "do". :)

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Joseph Piotrowski

I went 12 rounds with rust and its split decision :). at least my joiner and bandsaw's cast iron looks good enough to use. still need to clean/lube stuff before i can use them.

i upgraded my workmate to a harbor freight 60" 4 drawer Windsor bench. it seamed a little rickety in the store, the drawers are not all that great but for 129$ it fit the budget. i added a 1x6 stretcher and some cross member to the lower shelf and it steady as a rock! a huge improvement.

that's all for me.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Wayne Cease

Stained the deck. It was thin in spots from the work by a crew earlier in the year, including a spot where water drips got it from some light rain (a surprise) the day they stained it.

Then cut some MDF and tacked it together with brads to make a simple box to put on top of our short TV stand in the bedroom. This was done to get the height checked for a new TV stand I will make.

The TV is at a much better height. Not that we watch much TV in bed, but previously it was rather low.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments.... *LINK*

Don Orr

I went to bed early Friday evening right after work so I could get up @ 2AM Saturday to go help fire a wood kiln at my wife's pottery center. We had the last shift to get the temp up to maturity (2300 F) and then down fire for reduction. Great fun with a great crew. I remembered to bring my splitting tools and was glad I did because I spent quite a bit of time splitting wood so it would fit in the stoking doors and it was good that I did because we would have run out of useable wood and not been able to finish the firing. We shut everything down @ 1500 F and cleaned up and went home. Unfortunately I will not be able to go to the kiln opening on Wed because I am doing a turning demo for our club. This was the 3rd firing of the new kiln called "Bruno". Pics and video available at www.monroeclayworks.com . My wife does the website.

Sunday was mostly an outdoor day in the yard-last mowing for the season, covered the AC unit, put away hoses, etc.


Monroe Clay Works

Re: WC Weekend Accomplishments....

#5

Sounds like work...

John K Jordan

Yikes, a wood-fired kiln - that's starting to sound like real work!

My potter friend down the road had a 2" gas line run thousands of feet to fire his kilns. I don't know much about firing ceramics except I shot some video and it was hot! I may have mentioned this before but in case not, this might be interesting.

http://www.paulmenchhofer.com/video.html

I think he still does the largest Raku-fired pottery in the world. He devised a stainless canister holding strips of paper to lower over the pots for the reduction needed for Raku. Sometimes he will apply new glaze and refire multiple times until he is happy with the look.

A gas-fired kiln seems like cheating next to your story...

JKJ

Re: WC Weekend Accomplishments....

#6

Re: Sounds like work...

Don Orr

It is for sure a lot of work-but fun with the right group. Especially when they have been awake for 24+ hours and are getting very silly.

I have helped with Raku many times and that is fun too. Very hot and smoky. I give the clay center a lot of my turning chips for Raku firing-I'm careful to only give them domestic northeastern hardwoods-no exotics.

Paul's work is certainly spectacular! I love Raku style pottery.