Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Bandsaw fence, buy or build?

Posts

Bandsaw fence, buy or build?

#1

Bandsaw fence, buy or build?

Joseph Piotrowski

I have a jet 16 bandsaw. I have about 15 mins of actual usage on it. Years ago. I clamped some scrap material to the table. This weekend I am getting it ready for use. All my immediate work will be ripping or reswawing.

I can get by with clamping some scrap but would like to get something reliable, either a day or a after market fence. I would like to know what you all use?

Thanks,

Joe p

Re: Bandsaw fence, buy or build?

#2

Re: Bandsaw fence, buy or build?

Derek Cohen (in Perth, Australia)

I cannot imagine having to clamp a piece of wood across the bed, then unclamp and reclamp each time a new setting was needed. A fence is not a luxury accessory.

My bandsaw is a Hammer, and so I cannot recommend its fence as it is not available as an aftermarket purchase. However I hear great things about the Laguna, and that is the one I'd look into.

Regard from Perth

Derek

Re: Bandsaw fence, buy or build?

#3

Re: Bandsaw fence, buy or build?

John K Jordan

Same as Derek, I couldn't work efficiently with a fence that wasn't instantly and accurately adjustable. I sometimes change mine multiple times a minute when processing green wood into turning blanks and with the scale (with magnifier) I rarely reach for a measuring tape. The way it's made aligns it perfectly each time it's locked down.

Mine came on my 18" bandsaw so I can't recommend an aftermarket fence. I wonder if in your case you can get an original fence from Jet.

JKJ

Re: Bandsaw fence, buy or build?

#4

Re: Bandsaw fence, buy or build?

CharlieL

If I was you, I'd keep your table saw to do the ripping and resawing. But if you insist not too, I have a JET 14" bandsaw, it came with the JET fence and I added a taller aluminum piece to it for cutting veneer someday. The piece that I added in my opinion came out fitting and looking pretty good. I can't remember what scrap it was from, but I have more if someone wants to do the same.

Re: Bandsaw fence, buy or build?

#5

Square pegs and round holes

Joseph Piotrowski

I would never ever resaw on table saw. That scares the heck out of me. Any ripping done on bandsaw isn't to replace the table saw. Yet.

Re: Bandsaw fence, buy or build?

#6

Kreg.


Re: Bandsaw fence, buy or build?

#7

Re: Kreg.

Joseph Piotrowski

seams like the best deal. especially since i just looked my wallet!

Re: Bandsaw fence, buy or build?

#8

Re: Kreg.

Barry Irby

I have the Kreg fence on my 14" Delta bandsaw and I like it. I have the taller curved attachment for resawing that bolts onto the fence. I like it too, but I have dyslexia or something like it (dysgraphia?) and I find the taller fence confusing. I probably can't explain it to someone with normal thinking, but it seems backwards to me. Turn the wood this way to make the blade go that way???? What???

I also have a homemade one and the Kreg one is better, but the homemade one did the job quite well until I got the Kreg. the Kreg was easy to install and adjusts easily for drift.

Re: Bandsaw fence, buy or build?

#10

Re: Square pegs and round holes

Joe in a Cleveland suburb

That's exactly how I feel...

Re: Bandsaw fence, buy or build?

#11

ebd

Re: Square pegs and round holes

ebd

+1. The table saw is not made, nor is it safe, for resawing. You get a shit surface, waste a wide kerf, and are seriously limited on the width of a board that can be resawed. That's before even talking about kickback.

Re: Bandsaw fence, buy or build?

#12

Re: Kreg? Maybe not...

Denny

I have an older version of the Kreg fence, made by FasTrack, which I believe was bought by Kreg. Mine is on a 16" Jet, and it's just too flexible to be very useful. I find I have to clamp a wooden stop at the back end of the fence to stabilize it for anything important. Maybe Kreg has improved the fence since then, but I'd try to find one and see if it still flexes.

Re: Bandsaw fence, buy or build?

#13

Re: Kreg? Maybe not...

jessecloud

Same here. Hard to keep the Kreg at 90 degrees, had to fool with it every few cuts.

I made myself a couple of fences with melamine contact surface so the wood would slide smoothly.

Its held a dead 90 by gussets attached to the vertical and horizontal faces.

It put a couple of strong switchable magnets on the base. They hold the fence firmly - never had to

readjust, and its super easy to move the fence when needed or when trying to sneek up on just the right

thickness.

Re: Bandsaw fence, buy or build?

#14

Good idea

Denny

I really like the idea of using switchable magnets, even if its just to stop the fence from flexing. And Lee Valley has free shipping going on now...

Re: Bandsaw fence, buy or build?

#15

Re: Good idea

AZ in Colorado Springs

I have a Carter fence with the switchable magnets. It's great. There's no rail to ride on, of course, so you've got to line it up carefully, but it beats the heck out of balancing a clamp on the rim of the underside of the table. You can fashion filler blocks to fit under the table, but magnets are much simpler.

Re: Bandsaw fence, buy or build?

#16

I use two fences

Bill Tindall, E.Tn.


A dedicated fence that can be rapidly adjusted (think table saw convenience) for width will make the saw convenient to rip with and convenient to saw tenons with. Ripping on a band saw has its advantages.

However, dedicated band saw fences are too short for ideal resawing. For resawing I like a fence about as tall as what I am resawing. To that end I made an "L" shaped fence with one leg taller than the other that I clamp in position for resawing.

I resaw a lot of drawer sides. I have determined how far the fence needs to be from the edge of the table. I position the fence quickly from this reference point.

Re: Bandsaw fence, buy or build?

#17

ebd

Re: Kreg? Maybe not...

ebd

I have a new (er) Kreg and I don't find that it flexes. I frequently thickness boards for boxes that I make and don't have any problems. Admitedly the boards are not huge. Don't know if that would be a factor.

Re: Bandsaw fence, buy or build?

#18

the answer is...

Joseph Piotrowski

so far the laguna after market fence looks like "THE" fence to have. i rather not settle on a cheaper one that needs fiddling around for my saw. the magnetic one look interesting and maybe solution should i fall short of funds for the laguana

so i'll use some home made jig until i can buy that bad boy!

thanks for all the great input!

thanks,

Joe P.

Re: Bandsaw fence, buy or build?

#19

Re: Good idea

William Duffield

I have a bandsaw with an Aluminum table. :(