re-introduction to everyone. long winded
Joseph Piotrowski
Woodworking hobby part duex!
The first time around I jumped into woodworking in adult life. Never used hand tools much growing up but when i did it was probably wrong. I was prompted by a fixer up home and a few episode of new yankee workshop. Toss in a few bob vila's and i was enticed. My opinions and option were swayed at the time by the loudest voices. Things like you need a table saw. Those awesome shop tours from seasoned woodworkers. Magazines like wood, then fine woodworking. Too much chatter and not enough experience. I’m a technical person, maybe over analytical in designing things. Ideas turn into the most fantastic, complicated designs that account for very factor under the sun. so i bought tools because i thought i needed them. I never look at alternatives and options. I never went through a process to proof i needed something.
I did make stuff. Never great stuff. But life got in the way of my hobby, so 10-12 years ago i shut down cutting wood. Now i’m back with a new attitude. Since my blackout there are some new (to me terms) movements “maker” and “hybrid woodworker”. Maybe add a third. Tiny house nation(all about downsizing)
I doubt these ideas themselves are new but they are now more front and center in the world. And let me tell you they are liberating! Maybe some maturity on part has lead me change my opinion and options on what i need, what i want to do and how i got about doing it.now i look at a task and evalute what i want, what the level of refinement i need and get it done! In the past i would look so far down the rabbit hole trying to be perfect and make the absolute best thing ever. Then it never gets off the ground or turn out poorly anyway.
This becomes evident in my effort to reclaim some shop space from my garage. Being what things are, i'll never have access to all my garage. In the past i would try and make the ultimate bench or mobile station etc. or making a cabinet for shop tools i look to make perfectly sized space for exact tools. Maybe consider dovetail joinery or other finer quality joint. There are some youtube video where people are all making a certain mitersaw station. I look at that and start to tweak it to i can optimize it and build it for my shop.
I caught myself!
It a slow process but turning to a makers mindset Now i look at what am i building? What is the most time i can spend on it? What the easiest and most functional joint i can use to make it? I may think modular and look at making grooves every 2” inches to divide it up along the way.
So i say, I have some overhead space to use. Let's make cubbies.. I have maybe 4 hours sat. so i say forget dado grooves. Lets use screws/pocket holes to build it.
So this saturday i’ll put it to test. Its relief to get it done and move on. There shop cabenits for a hobby woodwoker. I’m not show casing anything. Why waste money and time wood and high end joinery.
I also am beginning to look at my tools with the same vision What am i cutting, how much am i cutting? Is this tool what i need right now? Experience with my tools shows me i don’t need as much as i have. And that a big mental hurdle! I look at my table saw and really, having set up well, lots of jigs, it is an excellent tool to anchor around. But for the one off here, one off there, i spend too much time making jigs and etc that i’m not getting the benefits from the space it takes up.
So I put it up for sale. The amount of room it frees up is substantial for me. Should i find myself in the need for a table saw in the future, i’ll buy it. I’m not going to be stuck in my current state(going table sawl-ess) out of any pride or duty to an ideal of how i should work. If i want to use a hand tool, i will. If i need a $3000 table saw, i will. And even power hand tools are an option. When my circular saw fails to give me the performance i need, i’ll look at getting a tracksaw.
I do admit a certain appeal to hand tools right now. I think it will give me a closer more intimate relationship with the wood. Understanding its nature and how to work it properly instead of just over power it with machines. And if i chose to use power tools, it make influence how i use them and set them up. But for certain i am favoring the idea of low noise, less dust and some exercise too boot!
Enough rambling. I thought i introduce myself again and vent out this giddy feeling of a new process. My mind is aglow with whirling, transient nodes of thought careening thru a cosmic vapor of invention.
Later Joe P.



