Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Table finish, table shipping, etc.

Posts

Table finish, table shipping, etc.

#1

JL

Table finish, table shipping, etc.

JL

My niece lives near Santa Barbara on the left coast.

She would like her uncle to make her a dining room table (and by the way, could you make two benches?).

Question 1: Table finish. I was thinking about a catalyzed finish. I figure if it is a dining room table, there will eventually be moist things sitting on the table, glasses, etc. I was thinking about a conversion varnish.

Any other thoughts?

Question 2: Shipping the table and benches. I priced out shipping the table alone. Not cheap. As she wants a trestle table and she wants it 8' long - it would occupy "2 1/2 pallet lengths" with suitable crating and padding. Even if I do the table at the diagonal, it still is pretty long (at least 2 pallets) - and I couldn't ship the benches. So, by the time I make the crate, pad the table, package it up, get down to a warehouse and finally ship it - I'm looking at $1.5-2K. Not cheap.

Her husband is willing to pay for it - so okay.

Would y'all consider it crazy to contemplate driving it out there? Driving would be 2450 miles or so. If I hauled a trailer, the cost of the trailer rental and the gas needed for the trip would be on the order of $1K. That would include a leisurely trip back. I figure I could make the trip in five days. If I stayed in state and other parks and camped - that would add another $200 or so to the cost of shipping (on his dime) - on the way back, I figure I could do the tourist thing.

So - thoughts?

BTW - they want the table out of black walnut. So the cost of the wood alone is going to be on the order of $1.2K by itself.

Re: Table finish, table shipping, etc.

#2

Re: Table finish, table shipping, etc.

Barry Irby

For shipping the table, check out UShip.com and FreightQuote.com. My friend uses them all the time to ship odd things. You post the size and weight and they bid in reverse, going lower and lower. You can review the ratings and pick the one you like.

Also, IO have had luck in the far past by contacting moving companies and see if they have a load of household furnishings going in the right direction. Sometimes they will add your pieces to their partially full truck for a reduced fee, and being house hold movers, they mat be better at handling the pieces than traditional freight companies.

How handy are the folks receiving the stuff? Could you make this a knock down set and flat pack it?

Re: Table finish, table shipping, etc.

#3

JL

Re: Table finish, table shipping, etc.

JL

They are handy enough - but even flat packing it would be "2 1/2 pallets" in length. The table top will be 8' L x 42" W when I finish it.

I got the quote from a freight jobber that I know in Atlanta. I will check on the others.

Re: Table finish, table shipping, etc.

#4

Re: Table finish, table shipping, etc.

Dick Coers

I shipped two 10' skids from Phoenix, Az to Peoria, IL at a total of 3000 pounds for just over $800 using Freight Quote. You have to be patient with the delivery time. They pick up little loads from all over a region, and they sit at a terminal until a full load is ready. They won't tell you that, they just keep shifting the delivery date further out. Shipping finished furniture on a skid would scare the hell out of me. I don't think you could put enough protection around it to prevent damage from a fork lift.

Re: Table finish, table shipping, etc.

#5

Re: Table finish, table shipping, etc.

Jim O'Connor

I've made three trips from Wyoming to Northern VA over the years to deliver furniture to my daughter and family, 4 days of travel one way, 2100 miles.. Yesterday I shipped via UPS a liquor cabinet 28w,18d 56h in 3 packages, 2 for the case and 1 for the shelves. The base at 37h,28 and 18 weighed about 70 lbs. and cost $150 and the total was $253.

If you have the time and need a visit I would go for the self shipment.

Re: Table finish, table shipping, etc.

#6

Re: Table finish, table shipping, etc.

jessecloud

I suspect you could find overnight lodging with Woodcentralians for the trip. I can offer a bed and a parking spot for your trailer in New Mexico, a long day's ride from Santa Barbara.

Re: Table finish, table shipping, etc.

#7

Re: Any other thoughts?

William Duffield

Have you considered a more traditional varnish finish, such as Waterlox original or P&L 38? They are more repairable than conversion varnishes and poly, and the surface doesn't look lo much like plastic. However, repairability might be a moot point in California with their stringent restrictions on the release of VOCs, which could make access to either of those products very difficult. (There's no problem with bringing finished products into Callifornia, just with buying the finishes there.)

Have your customers considered some of the disadvantages of bench seating? While they are necessary seating for a table built into a breakfast alcove, for example, individually moveable chairs are a lot more flexible to use, since no one gets trapped in a corner, forcing others to move when they need to get away from the table. They are often more comfortable. Of course benches can be much easier to build and ship and can be sturdier than chairs. I don't think the rustic ambiance of benches with trestle table is usually enough reason to substitute benches for chairs.

Re: Table finish, table shipping, etc.

#8

Re: Table finish, table shipping, etc.

John K Jordan

Ooo, a class C RV, perhaps pulling a trailer, might make for a nice trip with relaxing return through some country you haven't visited. If the niece needs a trailer maybe instead of pay for the shipping they would like to buy one for a one-way trip.

We had a table once with a bench down one side which was great for the kids. Not so great for the grownups. When the kids grew up I shortened and repurposed it here at the farm.

JKJ

Re: Table finish, table shipping, etc.

#9

Re: Table finish, table shipping, etc.

Brian Holcombe

Deliver it yourself. Ask anyone who ships priceless antique or newly made top end furniture and even if they are using the best shipper in the business they would still prefer to do it themselves with certain pieces.

If you have to ship, make a crate and make sure to secure the piece within the crate.