I am repairing a Stanley 92 marking gauge. It has a missing flat head screw which is some size between 6-32 and 8-32. Has anyone solved the missing odd sized Stanley screw problem with some functional repair?
Victor sells 10 taps in the #7 size, so finding the size would require a lot o test screws or something similar, Then it could also be some off thread size in a different screws size as the base hole for different screw sizes can be the same depending on thread pitch. If you could thread into the hole a piece of plastic, or wood like a small dowel or toothpick, you could put the pitch off that. There is always some machinist trick for this kind of thing, but I don't know what it is in this case. The thing is that there is no limit to the potential sizes if the screw was hand made. If they were cut on a machine, they could be any size.
There are a few listed on eBay. I've had some success in situations like yours by contacting the seller and asking him/her to take out the screw and measure it up. Some will, some won't.
Re: Replacement for odd Stanley screw question *LINK*
Bob Entwisle in NJ
Hi bill.
I've no experience with this supplier, but it might be worth a call or email.
According to the web site in the link:
" Original Stanley-made vintage screws, bolts and other parts - from 1858 to about 1970. Planes, Scrapers & Spokeshaves, and other tools have threaded parts have proprietary & obsolete threads and are not available in hardware stores.
To assist you in providing the right parts for the specific model and vintage tool, please provide me with pertinent physical details: markings on the tools -patent dates, trademarks, etc. Also, please email pictures of the tools to me."