Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Simple CAD

Posts

Simple CAD

#1

Simple CAD

TomD

So this is a cad drawing that brings together various things for laser printing.


The curvy thing in the upper part of the photo is a finger covering for archery, a tab. The faces are to be applied to leather as a guide for carving, some parts are for references, others would be cut in.

The squarish bit was a clothing pattern.

The faces and tab started as pictures that I then overlayed with lines or circles or bouleans and the result is the drawing which unlike photos are cad files that can then be processed. For instance the lines in CAD are specific, they are math formulas that detail exactly the parts. The lines are continuous and could be tool paths. They are clear and easily read. They can be stretched to any size. When making other things I can borrow previously drawn elements and copy them in. So for isntance when I made the actual tab I could go into the drawing and take out the radius of the finger hole. Turned out I had a ferule that size, so I sharpened it up and had a tool for punching out holes.


Re: Simple CAD

#2

Re: Simple CAD

TomD

Oh good you found your answer. I started out with a far too complicated example so by the time I got to this it was well on. I will drop the second part of this.