Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Spraying things with legs

Posts

Spraying things with legs

#1

Spraying things with legs

Bill Tindall, E.Tn.


The problem to avoid is overspray from the legs in the foreground can stick to legs in the background. Here is what I do, and it may not be best. Would like to here from the other sprayers.

The foreground legs make a "U". As quickly as I can, I spray the inside of the U, then the outward facing face of this U, rotate the structure on the lazy susan 90 degrees and repeat for the 4 U's. If that works I go with it.

If I am getting overspray roughness on the inside of the legs then I do something different that is a bit more awkward. I spray all the outward facing surfaces. The I reach through the legs in the foreground and spray the remaining inside surfaces of the back legs. This orientation directs the overspray past any previously sprayed surfaces.

What do you all do?

Re: Spraying things with legs

#2

Re: Spraying things with legs

Chuck Jurvelin

Depending on the space you have to work with, I often find it better to prefinish the legs before assembly. Otherwise, a piece of felt with a little paste wax removes most overspray without damaging the finish. I almost always spray S-Wms. Hi- build Precat Lacquer with the medium rub finish.

Re: Spraying things with legs

#3

Would a "mask" work?

Gary Smyth

If overspray to the opposite legs interior is the concern would a large cardboard "mask" fitted between the legs be a easy fix? The picture is an illustration of what I'm suggesting, not a set up. I'm thinking that the cardboard is portable, reusable, and will stop overspray until you rearrange the cardboard. It would only touch the opposite leg at the top or not at all if a stand off was used.