Got Wood?
Mark Mandell - Gone Round In New Jersey
http://www.cnn.com/2016/09/19/design/london-design-festival-the-smile-clt/index.html
Knowledge You Can Build On — Est. 1998
Got Wood?
Mark Mandell - Gone Round In New Jersey
http://www.cnn.com/2016/09/19/design/london-design-festival-the-smile-clt/index.html
Thanks for the laugh!
Re: Got Wood?
Keith Newton
Well now, isn't that clever? I wonder why it took someone this long to come up with something like this.
I'll try to remember Allison Brooks, and CLT to see how this holds up after a few years.
Hmmm
Mark Mandell - Gone Round In New Jersey
"Should we use a film finish or penetrating oil to keep that 'just-off-the-truck' look?"
I'm still trying to figure out if this is for real
Keith Newton
It seems to me that it would start self-destructing as soon as it was finished.
Treating thick solid wood as if it was plywood made of thin veneers has always led to problems. Then gluing up solid panels 46' x 15' before cross banding to other layers trying to expand the opposite way whenever the humidity changes.
Even if each layer has only a 1% MC change, that would be enough to break the glue lines between layers. If they used KD lumber to start with, then that would be a 10" expansion for that much cross grain layer down the lengths as it gains moisture, and as far as I know, there isn't a glue anywhere that can keep it from moving.
It isn't hard to imagine a young artist or architect dreaming this up, but for there to be a commercial shop with the equipment to glue up panels of this size, to not have someone with enough understanding of wood movement to not throw up their hands and say "STOP what are you doing?" is beyond me.
Re: I'm still trying to figure out if this is for
George Koch
Keith, Just look up "cross laminated timber" which is what this is made from. Quite interesting!