Weekend at Woodworking in America
Stuart Hough
Just got back from Covington, Kentucky where I attended this years Woodworking in America conference. I ran into a couple of Centralians one from Indiana (I apologize for not remembering his name), and Wilbur Pan, who was presenting again this year, giving 3 seminars. As always, the Marketplace was bustling constantly, with lots of folks testing out the wares of various toolmakers and sellers. Patrick Leach had an outstanding selection of woodworking tools from the 18th, 19th and early 20th centuries. I picked up an almost pristine English striking knife that will be sharpened and used soon.
Lee Valley and Lie-Nielsen both had their layouts of extraordinary tools, gadgets and widgets for attendees to drool over and try out. I have to admit it was very tough to resist emptying my bank account over these bits of finery, but I somehow succeeded. I did end up purchasing a few items, one being Lake Erie Toolworks Moxon vise, justifying said purchases with the thought "I really CAN use this, and it's not really THAT expensive!" As Wilbur stated..."This is not about need, it's about the satisfying the id". I wholeheartedly agree!
I took a course on French Polishing given by Alf Sharp, and I must say, he made the process seem easy for anyone of any skill level. He explained some of the misconceptions, and showed some shortcuts that speed the process immensely. I found him to be a wonderful teacher, and a great conversationalist.
The plane tuning seminar given by Konrad Sauer and Raney Nelson was very interesting. The interplay between their two speaking styles kept things interesting. Both are infill plane makers, and while competitors, they have built a strong friendship and consult with each other constantly.'
Anther course I took was Roy Underhills course "Groovin' on Mitered Boxes".
We learned about the steps to creating a small mitered box, and tips to make the stock preparation easier. We also discussed cut nails, which he used in this project, and saw a demonstration showing why cut nails work so well, called "Nails Under Glass" where he nailed a cut nail into a piece of wood against glass, so we could see the action. Very interesting.
On Saturday Shannon Rogers gave a treatise on How to Buy Lumber for Your Next Project". He covered many aspects, from learning the lingo of the lumberyard, to estimating your project needs using common measurements instead of board feet.
Marc Adams gave a seminar on "Joinery 101" which was very informational for me. After explaining there are over 2500 woodworking joints known at this time, he broke them down into 5 basic types, saying that all the joints are variations of those 5 basic joints.
I skipped the next sessions so I could make the hole in my pocket a bit bigger, and had a great time speaking with Patrick Leach, where I bought the striking knife, and Ron Hock, who is always a gentleman, and a person I really enjoy speaking with. I "acquired" some of his wonderful plane blades and a hearty handshake.
On Sunday, I attended Wilbur's presentation on "Chinese Furniture". Wilbur is really becoming a very good educator on the subject of Eastern Woodworking. He makes it easy to understand the tool differences and techniques, and his passion for this is infectious.
As an added bonus, I walked across the bridge from Covington to Cincinnati, and was able to attend their Oktoberfest for a while. It was pretty cool be able to visit another state with a ten minute walk!
All in all, it was a very good weekend, where I was able to meet some new people, see some fellow Centralians, buy some new toys, and go to Oktoberfest! Can't wait to see where they'll go next year!



