Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Clear coating an emblem

Posts

Clear coating an emblem

#1

Jack Guzman from Maine

Clear coating an emblem

Jack Guzman from Maine

Client wants me to repaint a chair. Black paint with gold trim. He wants me to preserve the emblem on the back splat(shown).



I was thinking I'd cover the emblem with a clear coat of some sort so my scraping/sanding/painting won't disturb it. Then when I paint around it I can get right up to the edge with the black and if I slip I can just wipe it off.It would also serve to preserve the emblem as is. I'm using a latex paint.I thought of masking tape but that might lift some of the gold emblem paint.

Water based poly came to mind. Any thoughts?---Jack

Re: Clear coating an emblem

#2

Re: Clear coat +

Mark Mandell - Gone Round In New Jersey

Couple coats of clear sealer will help preserve it, but I think you'll also need a "resist" to prevent your paint from encroaching. Once the clear is fully dry applying a coat of paste wax should do the trick. Wax can be removed with mineral spirits after you're done or just buff it.

BTW, how'd the glass cleaning go?

Re: Clear coating an emblem

#3

Jack Guzman from Maine

Re: Clear coat +

Jack Guzman from Maine

Clear sealer? You mean that stuff that goes on before poly?

Haven't bought the chemicals yet. Gonna look for some stripper tomorrow.

thanks---Jack

Re: Clear coating an emblem

#4

Wow, that's going to be tough!

Dick Coers

I'm not even going to make a suggestion. That job could go bad really fast! No wait, I can't help myself. Take it to a good silk screener or sign shop. They may be able to get a good digital image of it, at exact scale, then they can duplicate it. Redo the chair with ease, then put on an identical decal or silk screened duplicate of what was there. Check with the customer of course!

Re: Clear coating an emblem

#5

Different tack....

Gary Smyth

I understand that the client wants to retain the emblem but does it have to be that original emblem or perhaps the same seal as a completely new one? Alumni associations typically sell that type of chair. If you contacted the University Alumni office you might be able to find the source of the chair and a call to that source, then get a copy of the decal. Failing that, most other universities have a similar chair. If you have any contacts at other schools try them too. Honestly, University of New Hampshire as a land grant school ought to have tons of decals of the University seal in various sizes. Getting one in gold foil should not be a problem. Try the book store and /or school printing office (graphic arts) also. Lastly, call up " University of New Hampshire seal images" on any browser from there you might be able to order one from some independent online source. Give them the size and color. Here is one from the internet.

(University of New Hampshire seal)

Of course, if the existing seal is critical to the client, ignore this. Contact the client and ask.

Re: Clear coating an emblem

#6

Re: Clear coating an emblem

Ed in Sugar Land

Here's a link to someone who does piano nameplate decals. Maybe he knows where to get one, or perhaps he can custom make one, as he offers to custom make piano decals. https://www.piercepianoatlas.com/decals.html

Re: Clear coating an emblem

#7

Re: Different tack....

AZ in Colorado Springs

Oddly, the years are different in yours and Jack's illustrations

Re: Clear coating an emblem

#8

Sealer

Mark Mandell - Gone Round In New Jersey

Nah, I thought you were going to apply "clear coat" as in the automotive paint stuff. You can mask off the surrounding wood, apply several coats of clear spray to the emblem, then a coat of Johnson's paste wax.

That said, getting a replacement decal from the school as suggested would be the ideal solution if available.

Re: Clear coating an emblem

#9

Jack Guzman from Maine

Re: Different tack....

Jack Guzman from Maine

I like that idea. I'm going to contact the school.---jack

Re: Clear coating an emblem

#10

GOOD CALL!

Gary Smyth

I'm wondering if the seal date on the chair (1923) is the class of graduation.

That makes things more difficult. but a easy fix if a source for the decal can be located. Inserting a different date would not be a problem except for quantities required to make that change. These usually come in sheets with various sizes on the sheet and they are cut out and transferred to the backing individually. All of the official seals are 1866. I'm thinking that the date has some value to the client (to make it an antique or a family thing) but maybe not. At any rate a new scan with a 1923 date in the proper font. That font can be found with the University who almost certainly has the font identified in their graphic arts standards manual. That is often the responsibility of marketing communications or the print department. Be sure to mention "gold". The right person needs to be found. The other date is not out of the possible. Find out what the client wants. The 1923 date may be a deal breaker for a new seal decal. If the seal has to remain as the original the client may have definite reasons.

Re: Clear coating an emblem

#11

Jack Guzman from Maine

Re: GOOD CALL!

Jack Guzman from Maine

Thanks I'm looking into that now.---Jack

Re: Clear coating an emblem

#12

Re: Different tack....

William Duffield

The years are the same; they're just arranged differently. The school was founded in 1866. The Durham campus was opened in 1893. The school's name was changed from New Hampshire College of Agriculture and the Mechanic Arts to the University of New Hampshire in 1923.