Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Tips from a Shipwright

Posts

Tips from a Shipwright

#1

Tips from a Shipwright

Christopher Fitch Memphis

I can't recall if anyone has posted this.

There's a series from a shipwright (Louis Sauzedde) titled: "Tips from a Shipwright"

He has a site here: http://www.tipsfromashipwright.com/ and his Youtube channel is here: https://www.youtube.com/user/TipsfromaShipWright

I would advise watching his Total Boat: Building a work skiff series.

Here's the first one: https://www.youtube.com/watch?v=C22Crc7XHoI

He's up to 11 episodes now. It's a fascinating series so far. However, it's also cringe-worthy in some ways such as when he uses a tablesaw with no guard, splitter, push stick, etc.

In spite of that, he really talks about some interesting things and displays some great techniques. He also is a very accomplished hybrid woodworker.

Check it out...

Re: Tips from a Shipwright

#2

Great stuff, thanks!


Re: Tips from a Shipwright

#3

Did all episodes on the skiff

Gary Smyth

The guy is a natural. Experience counts. He doesn't "ah" or "and", rarely stumbles with a description in his narrative. Not many frills, done with a single camera and additional inserted close ups would be helpful, but I'm going back for more. Educational and entertaining. Thanks for this heads up.

Re: Tips from a Shipwright

#4

Re: offcenterharbor.

TomD

When I am at the farm I use a table saw that way quite a bit. Boatwrights are the guys that saw curves with a skill saw, which is the way it goes with a hand saw, I suppose, a wide piece of metal stock following a curve. But the same thing goes with a table saw. It isn't dangerous, if it is done with a low powered saws. And as far as the straight cuts are concerned, last summer (well this summer I guess) the saw wasn't tracking well, and it has one of those old fences, so you are pretty much on your own anyway. Not the world of the 3hp with unifence. Those saws can easily kill you.

Also, these days I pretty much never finish a rip without a flip regardless of what kind of setup I use. The saw isn't getting my fingers anyway.

Gotta check out offcenterharbor if you want mostly traditional maritime content, though other than the trial there is an annual fee. I can't afford that kind of thing, but I dove in for one year and am trying to wade through it all in that period.

Re: Tips from a Shipwright

#5

Re: Tips from a Shipwright

tom

Thanks! I have been watching every one of his videos.