auction lumber
cameron youngstrom
I picked up 800-900 bf of cherry and walnut from an auction for a really good price but there was a catch. The shop had been unused for several years and obviously some water had gotten into the place, really musty odor. As I was loading up the wood I realized this guy had just stacked his lumber on the concrete floor and the bottoms of the piles were damp. I left the obvious bad stuff behind (lost some really nice 10-12/4 x 10' boards as well as some 5/4 x 12-14" wide stuff. A few of the boards on the bottom had some bark or some cracks that had some kind of white fluffy fungus-type stuff within (I have a picture but am not sure how to get it posted on this site due to needing it on the web...). I figure that is bad and have been cutting those areas out of the boards and am storing them separate from the rest of my lumber. Does anyone have experience with this stuff? Hoping I haven't brought the plague into my shop and basement storage area...
Also, the moisture content is hovering ~12%, I typically deal with kiln dried or very air dried lumber. I have stacked most of this with stickers in my basement and plan to let if dry (already have a big pile of dry stuff so there is no rush on this pile.) Question is this: I've flattened and planed most of the boards that were towards the bottom of the pile and had the white stuff thinking that I'll remove any contamination. I brought one good sized pile down to final thickness before I thought about movement as this stuff dries down... I've stacked this stuff with stickers on my shelf. The 2nd pile I've only planed down to ~7/8". Am I likely to lose the 1st pile? Can/should I bring the 2nd pile down to 3/4" or should I wait until it dries more? I'd like to plane it down now if possible to remove more of the surface material as well as reduce the weight and volume it takes from my shelves...
thanks



