Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Epoxy Primer Question

Posts

Epoxy Primer Question

#1

Epoxy Primer Question

tom

This is not woodworking related but thought someone here might have the expertise to respond. I sprayed ,after sandblasting, a bike frame with 2 part epoxy primer. Because the final color has not been selected the base and clearcoat will be done later. We used the bike and where the water bottle leaked it started a bit of surface rust. So my question is does the epoxy only not prevent rust but only when used with the base and clear coats? I re-finished 2 other frames last winter complete with base and clear and no problem.

Thanks in advance for your help!

Re: Epoxy Primer Question

#2

Re: Epoxy Primer Question

ken combs

I can only answer for the brand I use, Kirker. It is waterproof, IF applied as directed. That is, properly mixed, temperature within range and adequate film thickness.

That is one of the things that attracted me to it, the ability to withstand less than perfect storage when a project takes a while to complet.

Re: Epoxy Primer Question

#3

Re: Epoxy Primer Question

TomD

I don't think your paint should have rusted right off the bat, but at the same time epoxy primer is mainly there to interface, as a primer. It does not guarantee any rustproofness. For one thing if it is thinned to spray there will be large pores in the coating that will leak through water, as there are with powdercoats. The actual color coat is more rustproof if you can get it to stick. By the way, a sandblast that is epoxied within a few hours when water would still wet the steel and not bead will give you the best bond to the steel.

I make frames as a hobby and post a lot on bikeforums frame forum, and their vintage repair forum has more on painting a really good painter hangs out there.