Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Gettin' Hosed?

Posts

Gettin' Hosed?

#1

Gettin' Hosed?

Mark Mandell - Gone Round In New Jersey

Since there are a couple of wood-floor guys here, I'm wondering if I'm getting taken on a refinish job.

Second floor bedroom - 16' x 13'6'' including 2 closets

Floor is oak and in good shape (this is first cut) but for the holes where tack strips were removed.

All baseboard removed.

Current finish is oil poly (possible light wax as Bona spot scratches off when dry)

Job is to sand, stain to amber, fill the nail holes, and apply 3 coats of Bona Mega.

Just got quoted $1,600. $7.50/sf seems high, even for Jersey.

Opinions?

Re: Gettin' Hosed?

#2

Re: Gettin' Hosed?

Mark Nowicki

I just looked at my invoice for one of my apartments, done in July.

CDN$1400 for 561 sqft, 2 coats of latex (actually 3, because i did not like the look

after 2 coats, and I am a good customer)

In your case, a small job eating up a working day a due to second floor location, closets, numerous trips back, etc., the fixed charges or minimums add up to make the price high on per square foot basis.

I don't think you are being hosed, you have a contractor who knows his costs.

Is the guy pricing the same guy who does the work?

Re: Gettin' Hosed?

#3

Same Guy

Mark Mandell - Gone Round In New Jersey

Last time we had 3+ times the sf done on the 1st floor for $4/sf.

Re: Gettin' Hosed?

#4

Re:

Mark Nowicki

And what was the area?

My guy increased his price in August due to higher material costs.

Re: Gettin' Hosed?

#5

Re: Area

Mark Mandell - Gone Round In New Jersey

216 sf bedroom

ps: in north Jersey

Re: Gettin' Hosed?

#6

Jason Roehl in Lafayette, IN

Re: Gettin' Hosed?

Jason Roehl in Lafayette, IN

It sounds high to me, as someone who refinished flooring for a time. I didn't do it full-time, so I tried to charge a little more and do a little more thorough job--but I hated staining. Customers tend to be pretty finicky when it comes to stain colors, so what I've heard from many who were in the business for years is that you build in more cost for staining, since there's a good chance you'll be re-staining.

That said, it doesn't sound way off the charts for me. Like someone else said, it's on the second floor (equipment is heavy and takes time to haul up and down), it's one bedroom (no room for a 2-man crew to work at the same time), plus the coats will be quick to put down (extra trips or wait for finish to dry). So you can look at it like this--you're paying for two guys for two days whether they actually spend 32 man-hours on the job or not because they likely won't be able to do much else during that time.

Jason

Re: Gettin' Hosed?

#7

ebd

Re: Gettin' Hosed?

ebd

Whewh. I'd rent a floor sander and use my hand held belt sander for the edges. Did it on a number of floors when we first bought this house. Didn't take that long, wasn't very hard, and it was done inexpensively, quickly, and to my satisfaction.