New method for bending wood, ;>) *LINK*
Keith Newton
Last weekend while I was down at my cabin, I finally got around to pulling the old walk-bridge out to my floating dock out of the water. This old one was 20' long, which was a bit short for as much as the river can rise during flood stage, plus I wanted the new location to be out in the shade of a small grove of Cypress, so the new one is 30'.
After cutting the old one loose, I floated it over to shore while the water was a bit high, where it had been aground since May. It was too heavy to pull up the steep muddy slope, so I was waiting for the water to be high enough to float it again when I had my trailer down with me.
There was a 2x4 handrail support still on it, which has been partially submerged for those 3 months, so totally saturated. When I floated it down to the launch upside down, I put on my chest waders and got out there trying to flip it upright, but wasn't strong enough, so thought What the heck, I'll just load it this way, and pull it out dragging that against the concrete ribs in the launch, which will probably break it off.
Dang I was surprised to see how much it had kinked without breaking. That looks like about 45º to my eye.
I also included a pic of my Rafinesque's Big-eared bat that I mentioned in the post by JKJ below.
https://www.flickr.com/photos/7391658@N03/sets/72157673241948265/



