Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Stock Guides....Me Likey *LINK*

Posts

Stock Guides....Me Likey *LINK*

#1

Stock Guides....Me Likey *LINK*

Thomas Skaggs, Foothills of Mount Level

Friends,

JessEm Tools makes some cool stuff (no affiliation). But I thought I'd pass along my impressions of their Clear Cut Stock Guides. I recently added these to my table saw fence. They were easy to install and it didn't take much time.

What is cool about them is how easy it is to position them or just re-position out of the way if not needed. Not only do they hold your board down to the table of the saw, but the urethane wheels are canted a little, which keeps your board tight to the fence. Safety plus accuracy of cut. I love that!

Anyway, I'm not selling anything here. Just passing along a product I like and have found really useful (and well designed). I'll attach a link and photos.

T.





Stock Guides

Re: Stock Guides....Me Likey *LINK*

#2

Re: Stock Guides....Me Likey

William Duffield

"Anything you want to do, you have to do something else first!"

I have a set of these :) . They're almost indispensable for feeding large sheet goods through single handed. And, if you can mount them permanently to your rip fence, they are easy to install. The installation instructions are very thorough and precise.

They learned a lot (and applied it) from the feed rollers for their router table fences.

However…

Wen not on the saw, my rip fence is stowed in a close fitting plywood box permanently attached to the bottom of the extension table. The rollers don't fit. >( So I have to figure out how to make them more easily removable. But that might actually be an advantage. JessEm makes several other pieces of quality equipment. I am very fond of my Mast-R-Lift II. Their fence is a bit expensive, so I decided I could build one that would work well enough. Now, I need to figure out how to attach the stock feed rollers to it so they will do double duty, and be quickly and precisely swappable between the saw and the router table.

Rhetorical question: If they'll work on the router table, then why not on the jointer, too? Maybe the answer lies with the new quad T-track from Lee Valley. We'll have to wait and see––I have some on order––Free shipping ends today.

Re: Stock Guides....Me Likey *LINK*

#3

Re: Stock Guides....Me Likey

Henry Higginbotham

What do these do that something like the Board Buddies can't do? Besides looking way cooler, that is. Easier positioning, maybe?

I'm not trying to beat these down or build anything else up. Just wondering what else you get for five times the price.

Re: Stock Guides....Me Likey *LINK*

#4

A Video Demonstration *LINK*

Thomas Skaggs, Foothills of Mount Level

I do not have a direct comparison. But if you are familiar with Board Buddies, I am attaching a link to a video of the Clear Cut stock guides. Perhaps you could watch it and report your thoughts? Thanks

T.


Clear Cut Guides Video

Re: Stock Guides....Me Likey *LINK*

#5

Re: A Video Demonstration

William Duffield

I never used or even handled any Board Buddies, but Google shows me they their design and construction is a kludge. I figure there's a good chance that the first plywood cutoff you bring back across the top of the table saw and smack into one of them, it's toast. TANSTAAFL

Rockler's* customers provide three reviews of Board Buddies. The one-star and 3-star comments are educational.

http://www.rockler.com/board-buddies-anti-kickback-hold-down#turnto-reviews-content

* I have no financial connection with Rockler. I've never bought a product from them. Someone sold them my e-mail address after promising not to, so an infinitesimal amount of my local taxes pays for disposal of the paper catalog they send me sporadically. Google found the review link for me. :D

Re: Stock Guides....Me Likey *LINK*

#6

Re: A Video Demonstration

Henry Higginbotham

It looks like a very nice product. The basic functionality is the same as the Board Buddies: hold-down pressure with an angular bias to kick the work against the fence.

Without a doubt, the Board Buddies are by comparison crude and a bit goofy looking, with several off-the-shelf components. Sometimes, though, that can be an advantage when something is lost or broken.

I've only had mine a few months, but so far they work fine. I've mostly used them for ripping hardwood. But the Clear Cut guides look like they'd work as well or better and be easier to adjust. For five times the price (I paid $50, not $80 for mine) they should be nicer. I'll keep an eye on them.

Re: Stock Guides....Me Likey *LINK*

#7

Leo Cuellar

Re: A Video Demonstration

Leo Cuellar

I've had a set of Board Buddies for many years. I like the shape of the rollers, they really keep your stock tucked up against the fence. They are especially nice for ripping long stock, when you don't have a helper to pull the boards off the back.

That said, they are a bit of a PITA to adjust and they don't have the range that these seem to have. Had these been available then, I might have been able to justify the extra cost.

Re: Stock Guides....Me Likey *LINK*

#8

Re: A Video Demonstration

Thomas Skaggs, Foothills of Mount Level

Thanks for doing the comparison and response. T.