Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

29 Aug 2016

Good Morning Everyone,

The weather has been good here since it finally stopped raining. My thoughts and prayers go out to all those that have been impacted by the recent weather patterns. Getting some things ready in the shop since the temps are cooler and I'm thinking that I'm more than ready to get back out in the shop, but time and effort will prove one way or another.

It's back oncall duty for me today, so I'm not expecting a great week of free time to do various things.

My youngest son proposed to his girlfriend this weekend and she said Yes....so that's a bit more excitement than I was planning for.!

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Used my homemade loose tenon jig.

Barry Irby

A few weeks ago I posted about buying a pallet of sticks that could be loose tenons. (7/8" wide, 3/8" thick, and 16" long, and I have 1000). I cobbled together a jig and bought an end mill. Built my son a Danish Modern (?) coffee table. Milled 32 mortises. Was definitely in the steep part of the learning curve. The end grain mortises kept coming out different depths. Kept looking at the router and bit. finally noticed the stock was slipping down in the jig from the end pressure. Used a better clamp and it went a lot better. The frame came out level and square and did not fall apart when I took the clamps off. Used 2 of my sticks. Only 998 left.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Hank Knight

Hi, Dennis. We could use the rain. Send some to South Carolina.

I'm closing in on the eternal chest of drawers project I'm working on. This weekend I got the boards dressed, edge jointed and glued together for the top. I spent a fair amount of time with my #7 on the edges and was rewarded with a nice, flat panel and good, tight joints. All that remains for the top is cutting it to size, finishing it and attaching it. I have a little tinkering to do to get the reveal on the drawer fronts even all around and finishing them, and the chest will be ready to deliver to my kids in D.C. I used Blum Tandem Plus with Blumotion drawer slides for the first time. I'm not super impressed with them. They have adjustments front and back to center the drawer and get the tilt right, but mine won't hold the adjustments. A have to keep fiddling with them. I'm thinking about giving all the mechanisms a shot of epoxy when I readjust them the final time to make sure they stay put. If anyone has a better idea, I'd like to hear it. Photos:

[URL=http://s50.photobucket.com/user/hankknight/media/Chest%20of%20Drawers/image_zpsb8ocqz5g.jpeg.html][/URL]

[URL=http://s50.photobucket.com/user/hankknight/media/Chest%20of%20Drawers/image_zps19zsywrq.jpeg.html][/URL]

Re: WC Weekend Accomplishments....

#4

Got started on another boat dock for my cousin.

Keith Newton

It is between his and our cabin, so will be shared by both. I'm building it extra strong, since we will be using it to ride 4wheelers out onto a boat to get them across the creek. This part is 42' long, the bridge will be 34', and the floating part will be 20' x 20', so 96' long.

While I was out roaming the woods, I found 3 patches of Chanterelle mushrooms. I gathered up about 3 gallons. Um um yummie, they are tasty. I just wish I'd gotten them before the last rain, which splattered dirt and mulch up onto them, and is hard to get cleaned off without damaging them.