Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

OT: Circular Stain on Marble Top

Posts

OT: Circular Stain on Marble Top

#1

OT: Circular Stain on Marble Top

Paul Leuba

During the cleaning of our bathroom an aluminum spray can of glass cleaner was placed on the Carrera marble top of our vanity. It left an aluminum colored ring stain from the bottom of the can. After some research on the internet, I applied a paste of baking soda and water to the area and covered it with plastic wrap for a week. The aluminum colored stain was "lifted" from the marble by the paste, and when dry the ring is not visible. However, when the area is wet the ring reappears, not with an aluminum color, but with an apparent different sheen or texture from the adjacent marble.

What can I do to remove this mark that only appears when the surface is wet?

Paul in Hunt Valley, MD

Re: OT: Circular Stain on Marble Top

#2

Re: OT: Circular Stain on Marble Top

Barry Irby

Ask you marble supplier????

How about covering the entire top with your mixture and letting even out? Then maybe treat it with a sealer.

Re: OT: Circular Stain on Marble Top

#3

Re: OT: Circular Stain on Marble Top

Paul Leuba

Thanks, Barry. I believe at this point I will need to consult the marble supplier. I'll see what they have to say about it.

Re: OT: Circular Stain on Marble Top

#4

Re: OT: Circular Stain on Marble Top

John in NM

I would guess something in the glass cleaner attacked the sealer on the marble. Your concoction lifted the stain, but when wet the unsealed area soaks up a bit of water leaving that noticeable ring.

I would try resealing before anything else.

I have to ask, was this a contractor who left the can there?

Re: OT: Circular Stain on Marble Top

#5

Re: OT: Circular Stain on Marble Top

Paul Leuba

That's a very good thought. I'll give it a try by revealing the surface.

The can was left on the top by a contract cleaning crew.

Re: OT: Circular Stain on Marble Top

#6

Re: OT: Circular Stain on Marble Top

Gary Smyth

Is it an antique? Is it important it be as it was --scratches small dings on edge? If not, remove the top. Wrap it up and support it for travel. Take it to a marble/granite/stone place and let them refinish the marble. Call for prices beforehand. This ought not be expensive.

They will put it on a flat table and wet buff, and seal it as new. For them a easy fix even if the soft, porous marble has been etched a bit. It will not visibly reduce the thickness. You get a practically new top and you might call the contractor and tell them you intend to send them the bill. This is too easy to fix with a pro for you to worry about and spend money on home processes that can be better applied to the stone vendor price for refinishing.

Re: OT: Circular Stain on Marble Top

#7

Re: OT: Circular Stain on Marble Top

Paul Leuba

Thanks, Gary. If re-applying the sealer to the surface does not correct the problem, this appears to be the best approach to a solution.