Continuous arm settee:Final-milk paint finish
Jack Guzman from Maine
I'm done with the final step of finishing on the continuous arm settee that I previously posted about. It is a multi-step process that I took pictures of at various stages. In this thread I will post some of these pictures and explain the process as I do it. This whole process is covered in a video by Curtis Buchanan on building a combback windsor.
The first thing I did was to go over the whole chair smoothing things out.Looking for rough spots,filling small holes(using water based filler)and just making sure it was ready for finish.
I start by mixing up a batch of barn red milk paint. There are two brands that I know of. I use "Genuine Antique milk paint". The other one is called "Real Milk Paint"I have heard that the other is harder to rub out but I don't know. Peter Galbert covers this subject in his blog."Peter Galberts Chair Notes"

I start with a mix of two parts powder to three parts warm water.I whip this up with an old style hand operated egg beater.Then I set the mix aside for 30 minutes. At this point the mix has about an inch of foam on top. 
I remove the foam and then stir the residue on the bottom into the mix gently and then pour it through a fine strainer. Some use cheese cloth but I find it too messy. It seems like you are wasting alot of paint but the stuff that's lost would just mess up your paint job.
I apply the paint with a 1 1/2" sash brush designed for latex paints.
More to come---Jack















