Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

2x12 pine 3pattern v-groove roof decking

Posts

2x12 pine 3pattern v-groove roof decking

#1

2x12 pine 3pattern v-groove roof decking

Matthew Lewis

I am a contractor from Bolinas Ca. I am looking for a 2x12 pine T&G decking with a 3-v-groove pattern to match an existing ceiling. The house that I am working on was built in the early 1970s(?). I am not sure that this was a common pattern back then for all that I have ever installed is the 2x6 T&G V-Groove Pine decking. Can you help me?

Thanks,

Matt Lewis

Lewis Construction

Po Box 731

Bolinas, Ca. 94924

415-307-3889

Re: 2x12 pine 3pattern v-groove roof decking

#2

I made some for a porch roof

Bill Tindall, E.Tn.

I decked a porch roof with 2 x 12 vee groove pine. I made it from 2 x 12 pine planks. It is easy to vee groove on a table saw with a vee groovy molding head. I didn't T&G the edges. I edge joined the planks with splines. I would lay a plank. Cut a 1/4 slot with a slotting router bit 'every foot or so down the length and insert a 1/4" piece of plywood for a spline. Mark the spline location from the first piece onto the joining piece and repeat slotting. It went quickly.