Re: How to remove chewing gum?????
Grant in Iowa
Barry,
Almost any kind of lubricant is good to remove gum. Here at work, I use a product called Houdini, which is an aerosol designed to lubricate locks. This works pretty good on carpeting. But you didn't ask about carpeting, did you?...you asked about vinyl flooring.
I would suggest WD-40, PB Blaster, Cooking oil, etc. These items will not likely dissolve the gum, but they do provide a lubricant to keep the gum from "resticking" as you scrape, brush, pick, or otherwise try to remove the gum. I would recommend applying a lubricant of some kind liberally, then scrape the majority off of the floor with something like a plastic spatula. Once you have the majority removed, then use a stiff brush or perhaps the same spatula and go after the rest. Keep the lubricant on the surface during this entire process, reapplying as needed to keep the gum from sticking further.
On carpet, I use the Houdini product, which doesn't seem to leave behind much of an oily residue. I use a small screwdriver or pick to pull the gum out of the carpet, then apply the lubricant, then more picking, and eventually it all comes out. This is on commercial carpeting, which is usually short carpet nap. I have been known to give longer carpeting a haircut.
So lubricant is the key regardless of the surface. You will need to remove the lubricant, so think and plan for that phase before beginning. To remove the lubricant, something like Simple Green or a mild solvent like perhaps alcohol should work well without leaving a residue.