Rot/bug question, do we have a chemist???
Barry Irby
I have long used BoraCare and Timbor to protect against rot and insects (PPBs and Termites in my houses. I believe the active ingredient in each is Sodium tetraborate. BoraCare has it in a glycol solution and you dilute it and then spray it on. The Glycol acts as a carrier or penetrant and is poisonous and the same ingrdient as in some antifreeze. The Timbor is a powder you mix in water and spray on and it tends to sit on the surface.
I just realized that 20 Mule Team Borax is Sodium tetraborate. 99+% with a trace of other minerals. I have looked on the internet and found recipes for making my own BoraCare. Not sure I want to do that. Boiling anti freeze does not seem to be a good Idea.
I have also bought "Borates" in the form of little rods. You drill a hole and insert them into the wood. If the wood gets wet, they dissolve and soak out from the inside, stopping any decay. I have used them to treat the bottom six inches of door frames.
My question is, why can't I use 20 Mule Team Borax for this? Without all the cooking of antifreeze? Perhaps just drill a hole and stuff it full of powder? And, Can "WE" figure out a way to use it to protect freshly sawn lumber?
It would be MUCH cheaper. Perhaps 1% of the cost of the little rods.
(PS...It looks like Boracare Really does work. About thirty years ago I worked on a house and soaked the bottoms of the porch columns in BoraCare. I stood them up in a shallow pan and poured in about an inch of BC. Kept adding more for several days. AS I recall, they soaked up far more than I expected. Over the last couple of days I been working on the house next door. The columns are in great shape. Not so much for the rest of the house.)



