Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Old Tungoil - should I use it?

Posts

Old Tungoil - should I use it?

#1

Old Tungoil - should I use it?

David C. Lykins

Well I finally got back to doing some wood working, though my tools are limited and I have to set up my portable router and tablesaw for every use. Anyway, I'm in the process of finishing a Black Walnut and Ash Watch Box for a friend of mine as a birthday present. Now I'm trying to decide on what finish to use. I have some shellac made from blonde shellac flakes and some old tungoil. I tested both the shellac and tungoil on a piece of black walnut. However, the tungoil, and I'm assuming because of its age, had sort of settled, it had a white milky sediment at the bottom of the bottle and light honey color at the top. I mixed the tungoil as best as I could and applied it onto the Black Walnut. Its seems pretty thick to me, however the finish seem fine with the exception that after a day of drying, I still had to wipe off the access tungoil.

So do you guys and gals think the tungoil is OK to use (it's now a tan milky color), or is there anything I should do to the tungoil, like heat it up or something to make the mixture better.

As far as an end result, the tungoil does come out a little darker with a higher gloss than the shellac after applying two coats (I'm assuming I'll need 4-6 coats no matter which I choose to use) of each finish.

Any information is greatly appreciated.

Thanks!

Re: Old Tungoil - should I use it?

#2

I use ancient Tung Oil

Bill Tindall, E.Tn.

I have a bottle of pure stuff that I use to touch up gun stocks. It is at least 15 years old. Old or new it takes a few days to cure.

Re: Old Tungoil - should I use it?

#3

Re: Old Tungoil - should I use it?

Dick Coers

Kinda depends on what the product really is. Personally, I don't like taking chances with the finishing at the end of a project. With all the effort I put in, I won't take a chance to save $15 with the finishing product. I'm frugal, but would hate to have a sticky finish to remove in a week after I put it on. Buy new is my advice.

Re: Old Tungoil - should I use it?

#4

Re: Old Tungoil - should I use it?

John McGaw

If it really is pure tung oil and has not started to polymerize then I wouldn't hesitate to use it. The fact that something had settled out of it over the years would make me worry that the original product wasn't the real stuff. Or perhaps the particles were something that came from the container if it was white plastic? In any case I would have decanted the clear portion to use and discarded the dregs. Too late now, of course.

Re: Old Tungoil - should I use it?

#5

Re: Old Tungoil - should I use it?

John Veerkamp

own strain it thru cheese cloth or a paint filter.

Re: Old Tungoil - should I use it?

#6

Re: Old Tungoil - should I use it?

don stephan

Mr. Coers gets my vote. Sounds like this piece would be prominently displayed and possibly handled often, and oily residue would not be a good thing.