Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

blade for box joint jig

Posts

blade for box joint jig

#1

blade for box joint jig

eliot feldman

I made one of those continuous screw advance box joint jigs, and I would like to use it with a flat ground 1/8th inch blade -- not, for example, with a 1/4 inch blade. I have several 1/8th inch blades, including several excellent Forrest blades; but none of them have a flat ground.

What do you suggest. please?

Re: blade for box joint jig

#2

Re: blade for box joint jig

Bill Tindall, E.Tn.

any rip blade cuts a flat bottom groove

Re: blade for box joint jig

#3

Re: blade for box joint jig

Lee Schierer in McKean, PA

I think the Freud LU82M or LU84M blades will give you a flat bottom cut. Both are 1/8" blades.

Lee

Re: blade for box joint jig

#4

Re: blade for box joint jig

Neal in South Carolina

If you like Forrest blades, you might want to get your hands on another one. They make a flat top WW II. I haven't been to their website to check, but it may be a special order. I don't know the price, either, as I got mine used when Yeung Chan upgraded from a 10 inch to 12 inch table saw. I meant that as an endorsement, not name dropping! Forrest will probably regrind one of your existing blades flat topped, too.

Re: blade for box joint jig

#5

Re: blade for box joint jig

Jim Dillon

I have used the Forrest flat-top grind WWII for a decade or so after reading Yeung Chan's superb book. It has been great. It can be ordered from their web site. But there are probably many other brands worth looking at and less expensive. Jim

Re: blade for box joint jig

#6

Re: blade for box joint jig

Barry Irby

I made the mistake of buying a Freud rip blade under the assumption they all cut a flat bottom groove. The one I got had alternating flat top and triple cut teeth. I was stunned to find out the triple cut teeth were taller and left the groove with a three sided bottom. I was disappointed and took it back to WoodCraft and they very graciously took it back and sold me a different on that cut a flat bottom groove. They remembered I was trying to by a blade that cut a flat bottom groove. I felt bad about returning a blade that I had used, even if it was for a single cut.

The second blade does an excellent job. I can give you the number if you need it. IIRC mine cuts a .10" slot, but they have many that cut an eighth.