It the same auction I mentioned below I have a chance to buy a Grizzly Model G0513ANV Bandsaw. 17" wheels, 2 HP motor, 12" cut. Anybody have one? I Have a 14" delta now with riser. Would you buy the Griz? What woudl you pay? I am thinking I would set it up for resawing and leave the Delta for everything else.
I was banned from another forum for answering that kind of question for too often, and our household is banned from buying anything from Grizzly. Wife tried to buy an electronic guitar pickup from Amazon, got an email from Grizzly saying they would not sell to anyone at our address. They shipped me a G0514X that had such low quality cast iron wheels, that nothing would stay put on the table of the saw when it was running. The spokes of the wheels were different thicknesses, the machining on the face of the wheel was incomplete since their was not enough material to machine. They drilled 9 balance holes in one side, and riveted on steel plates on the other side to try and balance the wheel. I placed two orders to get parts to rebuild the bottom wheel, then put on the blade and ran it, and found the top wheel wasn't much better. Also found out the base of the machine is like a thin sheet metal pan with no bracing. So any vibration in the machine gets amplified through that sheet metal base. They took it back. I see my review on Amazon is now gone, but I never recommend their band saws. Every time I talk about this, there will be a dozen tell me how many wonderful machines they have from Grizzly and support them to the end. Personally? Grizzly and I have a mutual agreement, they won't sell to me, I don't want to buy from them.
They could have been getting compliments from you instead if they had just done the right thing at the outset and taken care of the customer who got a stinker of a product. It happens now and then, and the vendor absolutely has to accept that they need to eat that cost.
Disclaimer: No horse in the match, don't own any Grizz machines, but have used a couple that I found perfectly acceptable.
I had Grizzly machines in the past. I bought several larger machines for the model shop at Caterpillar. But that band saw should never have left the factory. I spent days on the repairs including lots of time on the phone. Making me the quality control and repair technician really stunk. I've read other comments from people who suggest you are buying a kit when you buy their machines. You get the low price option, with a division that sends out any parts you may need. It appears they anticipate the demand, because they had all the parts I needed in stock.
While I'm not banned from buying from Grizzly I choose not to. I had a very similar experience to Dick's over a milling machine. I will never recommend buying a corded tool from Grizzly.
I shared a shop with a guy once. He had all grizzly. They were Ok. Not great but i think they were worth what he paid fkr them. I currently have a used cabinet saw that i bought. It had been used by a professional cabinet shop. I cleaned and lubed it and put in new bearings and its running great. Not the same quality as older powermatics and Deltas but i only paid 500 and kt works great.
Never had their bandsaw, but have had very good luck with their Joiner's, (owned 2 ~ still have one). their 3 HP cyclone dust collector and a couple of other machines. I did have an issue with the dust collector starting cap, their service was very prompt and polite and solved the problem within a week.
I have inspected many of the Asian imports from several vendors including Delta, Powermatic, Grizzly and others at woodworking shows. In my opinion NONE of the Asian imports compare to the machines built by the American brands in America, but the Grizzly compares most favorably in fit, finish and design.
I have the Powermatic wood- working drill press ~ cost about $!K, it is far inferior to the Grizzly, Dayton or others I have looked at from the same class or machines. It is quite noisy, chuck has "fell out" several times and also tends to stick so hard I have to use channel locks to remove a bit.