Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Pacemaker in the shop

Posts

Pacemaker in the shop

#1

Pacemaker in the shop

ChuckInND

At the end of the month I will be having a pacemaker installed. When reading the pamphlet that I was given it gives you things to stay away from, such as electric motors, and surprisingly they mentioned a table saw as an example. So, anyone out there with a pacemaker that is still woodworking ? I'll be having the discussion soon with the doctor.

Re: Pacemaker in the shop

#2

Re: Pacemaker in the shop

Chuck

I have had a pacemaker for the past eight years and have not had any issues at all in the shop. I was advised by my cardiologist to avoid close proximity to strong magnets and don't do any welding. so I don't put any rare earth magnets in my shirt pocket.LOL. Your doctor is your best source if information.

Re: Pacemaker in the shop

#3

Re: Pacemaker in the shop

Richard McComas

If you can't get near electric motors how you going to grab a snack out of the refrigerator? I think I see a new diet plan it the works. :)

Re: Pacemaker in the shop

#4

Re: Diet Motorvation ?


Re: Pacemaker in the shop

#5

Re: Pacemaker in the shop

fred in ct

I have a combination pacemaker/defibrillator that I've had for 10 yrs and never had any problems in the shop.

Re: Pacemaker in the shop

#6

Re: Pacemaker in the shop

Jason in OC

I have a defibrillator and it hasn't been a problem. The limit they gave me was 1 Tesla. Things that are "out" include: arc welding, cell phone in breast pocket, magnetic name tags over left breast, MRI's, large industrial motors/generators. (Don't visit Hoover Dam, they said.) I suppose pushing an electric drill with your chest might not be smart. Small motors at a distance of a couple feet should be fine.

Be sure to ask about airport metal detectors. Mine is OK to go through, but some aren't. They will give you a little plastic "I have a pacemaker" card that nobody in security cares about.

Just try to think of everything in your life that may affect the unit or the leads, and ask the Dr and the manufacturer's rep about it. For example, I scuba dive so I had to make sure the unit was good to 130ft of water pressure.

Good luck.

Re: Pacemaker in the shop

#7

Re: Pacemaker in the shop

Alexander Grigoriev

1 Tesla would be a hell of a magnet. For reference: less expensive MRI machines only have 1.5 T, and still need a superconductive magnet.

Re: Pacemaker in the shop

#8

Re: Pacemaker in the shop

Gary Bindel

I'm on my second pacemaker, 1st one 8 years and 3+ years on the second. I've never had any issues, in the shop or otherwise. You have to remember that the lawyers probably had a hand in writing the warnings.