Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Conveyor Belt for 16/32 Performax

Posts

Conveyor Belt for 16/32 Performax

#1

Conveyor Belt for 16/32 Performax

Barry Irby

I have a 16/32 Performax. The conveyor belt is failing. The seam is opening up and today I noticed an effect I had not thought of. The rollers are no longer tight against the belt, so it slips. I found a replacement on Amazon for about $100. Seems like a lot. Years ago I bought one from Woodcraft. Does anybody know if they still carry them? (They are closed for Memorial Day) I'll check tomorrow.

Is there any way to repair the one I have? Seems like some sort of glue might work. Or some of that nylon tape they use on sanding belts. Duct Tape?

Re: Conveyor Belt for 16/32 Performax

#3

Re: Conveyor Belt for 16/32 Performax

Mark Mandell - Gone Round In New Jersey

Klingspor for a replacement abrasive belt.

Tried cue stick glue, strapping tape, duct tape yada yada all filed in relatively short order.

Considered a synthetic rubber belt. Too expensive for my 22-44 and the amount of my use.