Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Laying up the veneer

Posts

Laying up the veneer

#1

Laying up the veneer

Bill Tindall, E.Tn.


Tools of the trade. When I learned to veneer in the Headley shop we used white glue and lots of blue tape to hold the sheets in place. So, that's what I do. They used a brush to apply glue. I find a roller quicker and it evens out the glue better.


It's in the bag, a urethane bag. Cheap as I am a urethane bag's limpness makes it preferred. Note the nice vacuum pump I scored at the lawn mower shop. Long story on that one.........

Re: Laying up the veneer

#2

Nice pump!

John in NM

That is the smallest Welch Duo-seal if I'm not mistaken, those pull about 1000 times the vacuum needed for veneering or lamination bending, and they tend to do it pretty fast and are quiet to boot. Excellent score.

Re: Laying up the veneer

#4

Re: Laying up the veneer

Alexander Grigoriev

For glue rollers, google "brayer". You can buy a cheap kit of 3 rollers (rubber, acrylic, rubber foam), I think it's Speedball brand. Works very well.

Re: Laying up the veneer

#5

Re: Laying up the veneer

TomD

I normally apply with a squeegee, like business cards in plastic I don't need. The vac will level the material so long as it is wet on both surfaces it will be fine. The largest vac I did was only 200 square feet and we did it with buckets and those yellow bondo squeegees. Rollers are great because they even out a coat, but for such small jobs I don't need the waste stream.

Re: Laying up the veneer

#6

Re: Laying up the veneer

don stephan

For applying glue when veneering, I've been using black foam roller covers for years with no complaints. I keep both 4" and 9" on hand, with both roller frames. When the vacuum is drawn in the bag, the roller over gets thrown away avoiding gallons of water for cleanup. My primary veneer adhesive is urea formaldehyde because I want to longer open time and rigid result, but I had to use a PVA type last year on a job for another person.

Re: Laying up the veneer

#7

Re: Laying up the veneer

Joseph Mulherin

Bill, what model is that pump?

Re: Laying up the veneer

#8

Re: Laying up the veneer

Alexander Grigoriev

Squeegee works, but a roller is faster. A rubber (non-foam) roller is easy to clean.