Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

radius grinding wheels. *LINK*

Posts

radius grinding wheels. *LINK*

#1

radius grinding wheels.   *LINK*

john lucas

I'm interested if anyone is using curved grinding wheels. I got a special jig from Don Geiger that creates a radiused grinding wheel. I've just barely had time to play with it and not sure how to test it just yet. Don says because you are only grinding at one point it doesn't heat up blades as bad especially chisels and plane blades because less of the blade is in contact with the wheel.

My friend Ken Rizzo that sells the CBN wheels is now selling a radiused wheel for the same reason. He says the flat wood workers really like it and wants to know how I think woodturners would like it.

Well so far just the 120 grit white aluminum oxide wheel on some turning tools I don't see any difference but then I've been sharpening tools so long I don't usually overheat them anyway. I hope to put some carbon steel plane blades to the test when I get back from Atlanta next week. Thought I'd ask if any of you guys were using a radiused wheel.


http://www.geigerssolutions.com/Tru-N-Dress-Grand-Slam.html

Re: radius grinding wheels. *LINK*

#2

Where have you been

Bill Tindall, E.Tn.

I have been talking about grinding on a radiused wheel for a decade. Control is much greater in my hands. I use a back and forth motion, light touch, starting just past the leading edge and trailing off the trailing edge. Repeat the other direction. I grind thin Stanley blades with no problem at 3600 rpm, 120 grit wheel.

Re: radius grinding wheels. *LINK*

#3

In the dark ages   


Re: radius grinding wheels. *LINK*

#4

Re: radius grinding wheels.

Dick Coers

I can see it on narrow blades, and if you have a sliding fixture for a plane blade. But I use a Wolverine holder for my bench chisels. Place the handle in the holder and then pivot into the wheel. I would not want to use a crowned wheel for that.

Re: radius grinding wheels. *LINK*

#5

Re: radius grinding wheels.

john lucas

Dick I have the original wolverine jig. When I sharpen bowl gouges on the curved wheel I don't really notice any difference. At least not yet. More experimentation is needed. Since the old style Wolverine lets me move where I sharpen on the wheel I can use any part of the curved wheel.