Blotching on Cherry
howard gorman
Hi All I am somewhat new to the site, but there was so much back and forth on this subject that I wanted to comment. Blotching is caused by different densities in the wood. Sanding to a very high grit will lessen it, but not eliminate it. When a pigment stain is applied, some of the blotching is lessened because more of the solids sit on the surface, whereas a NGR or water based stain penetrates more deeply and exaggerates the blotching. The best way to control this is with a wash coat of dewaxed shellac, or even the chosen sealer, just well thinned. This will reduce the penetration of the stain on the entire piece, but it will eliminate the blotching. As to whether the blotching itself is a positive feature, this is a matter of personal preference. The blotching can impart a more rustic feel to a piece, but controlling it is what you might expect to see in a more formal piece.

[/URL]
[/URL]












