Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

16 May 2016

Good Morning Everyone,

Yes, I'm starting this off a bit early. :)

I got the chair pieces made and I've spent a lot of money and time trying to match the existing stain color and finish. Needless to say that I'm frustrated over it and I can't keep spending money on colors, stains, dyes, and time to see how I can get a finish that is close to the original finish. The original wood appears to be Honduran Mahogany but I couldn't see spending $100 on wood (I'd have to order wood since local suppliers don't carry anything but Oak and Pine). So I chose Poplar and I'm so frustrated on this that I could scream. I'm already not going to make one penny profit on this deal. I just want to finish it and call the customer to come and get it out of my shop. If I can just break even, I'll call it good and a lesson learned.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Jason Roehl in Lafayette, IN

Re: WC Weekend Accomplishments....

Jason Roehl in Lafayette, IN

Saturday, I finished up my 7th annual Cover Indiana Bicycle Tour, a fundraising ride for Habitat for Humanity that covered about 380 miles over the course of the week. It was a good ride, but, as always, I should have trained more!

The rest of the weekend, I rested.

Back to the grind today.

Jason

Re: WC Weekend Accomplishments....

#3

Re: Drawers

Hank Knight

I finished the drawer boxes for the chest of drawers I'm building for my daughter and attached the Blum under mount drawer slide hardware last week before my second round of cataract surgery on Tuesday.

[URL=http://s50.photobucket.com/user/hankknight/media/Chest%20of%20Drawers/image_zpsbyblb6b6.jpeg.html][/URL]

Got them all done and in the chest this weekend:

[URL=http://s50.photobucket.com/user/hankknight/media/Chest%20of%20Drawers/image_zpsoozvuuht.jpeg.html][/URL]

I've never used these slides before and they are a little bit fiddly. I'm not completely sure I got the drawer dimensions right. I followed the Blum instructions, but I ended up with more side clearance than I expected. I think they will require some tinkering once I get the drawer fronts done.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Joe in a Cleveland suburb

Worked on my saw rehabs a little

Richardson Brothers

Before


Almost done


Goodell Pratt Steel Miter box

Before


Almost done


Re: WC Weekend Accomplishments....

#5

if it isn't too late, I'll be back in LR later

Keith Newton

This afternoon. I can probably find some scrap HM that you can have for the repair.

Drop me an email offline with dimensions, and I'll look around.