Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Zinsser Shellac Cans Leaking

Posts

Zinsser Shellac Cans Leaking

#1

Zinsser Shellac Cans Leaking

Christopher Fitch Memphis

I'm wondering if anyone else has seen this.

I have used Zinsser shellac off and on for years now. I've now had about 3-4 cans over the years begin to leak after a few months.

I just had a can of Sealcoat start leaking a few nights ago. I can't find any reason for it since it's been sitting in my finish cabinet undisturbed for a while.

There seems to be nothing wrong with the can other than it starts leaking from the joint near the bottom.

I've got plenty of other cans of finishes and solvents and no other has ever leaked like this.

Re: Zinsser Shellac Cans Leaking

#2

The Saga Continues

Mark Mandell - Gone Round In New Jersey

Consensus "seems" to be either the water content or some solvent in the mix sinks to the bottom of the can and rusts out that bottom seal.

Get new can at the borg.

Re: Zinsser Shellac Cans Leaking

#3

Re: Zinsser Shellac Cans Leaking

William Duffield

I've had it happen twice. A few years ago, I heard a rumor that Zinsser fixed the problem, so I had purchased another can. It leaked. From now on, I buy flaked or powered shellac, keep it in the refrigerator and mix it with everclear or Behcol when I need it, in the amount I need for the current job.

Re: Zinsser Shellac Cans Leaking

#4

Re: Zinsser Shellac Cans Leaking

Hank Knight

Happened to me. Big mess! Since then I decant my Zinssner Seal Coat into a glass jar for storage.

Re: Zinsser Shellac Cans Leaking

#5

Re: Zinsser Shellac Cans Leaking

Chuck

Is it possible that the cans are thinner? Just look around, everything is getting smaller, thinner, and less content these days. It boils down to profit for the companies, and the heck with the consumer.

Re: Zinsser Shellac Cans Leaking

#6

smaller, thinner, cheaper

John K Jordan

>> Just look around, everything is getting smaller, thinner, and less

>>content these days. It boils down to profit for the companies,

>>and the heck with the consumer.

I bought some galvanized steel washers from Home Depot a few weeks ago. They felt thinner than the last I bought so I measured them. A: the washer was thinner metal, B: the diameter was smaller, C: the hole was larger. The weight was about 85% of the old washers.

JKJ

Re: Zinsser Shellac Cans Leaking

#7

Re: Zinsser Shellac Cans Leaking

GolfSteve in Calgary

Happened to me also. The cans were three years old. Whadda mess.

I wonder why they don't use the plastic cans that some waterborne finishes are shipped in?

Re: Zinsser Shellac Cans Leaking

#8

Re: Zinsser Shellac Cans Leaking

Alexander Grigoriev

Alcohol evaporates through plastic. I have had SealCoat stored in a plastic bottle (one of those 1 quart sold at Rockler), and the bottle noticeably squeezed after a year. SealCoat was not spoiled and still dries hard, though.