Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

raise up a bed

Posts

raise up a bed

#1

raise up a bed

eliot feldman

My son wants to increase the height of one of his preteen daughter's beds by about three feet. Nothing fancy -- just wants to get it higher safely. So he asked me about it. He wants essentially to do it in place, which is to say that he is not going to take it apart and have me fashion something in my shop. He has some tools and some woodworking ability. The existing legs are about 1 1/2 inch square and look to be of some hard wood like maple. I suggested that he simply place some similar-sized legs under the ones that are there and bolt on some side pieces with at least two bolts above and two below where they meet. ( I hesitate to even call it a butt joint.) Now that I am thinking about it more, I thought I would ask here for ideas about this sort of thing. Any ideas?

Re: raise up a bed

#2

Lofting

Mark Mandell - Gone Round In New Jersey

(as it's called in the dorms) is done several ways.

a) 2x4 frame with gussets at the corners and pockets to take the ends of the legs*

b) Box the legs with 4 pieces of material with the lengths being the height wanted which get secured to the legs and the bed frame. Box has to be tight to the leg in all 4 directions.

* preferred/required with steel frame dorm room beds. [Good thing I took some tools when we took my daughter out to CU]

BTW, if your son lives in/near a college town, the local lumber yards etc. may have lofting kits, precut and bolt-together, for sale.