Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

2 May 2016

Good Morning Everyone,

I know it's not exactly morning time here and where many of you are, but I'm trying to get an earlier start so I can hopefully get some sleep tonight. This has been my oncall week and it's been fairly busy off and on. I'm for sure ready for it to be over. :)

I've been working on a chair "repair" job for my family doctor. He said that his wife's dog chewed the chair stretchers and such up really bad on this one chair and wanted me to fix it for him as the chair belonged to his mother or his grandmother, I just don't remember which. No matter, here are a couple of pics of what I have started with:




Currently, I have turned a new center stretcher and one of the side stretchers. I now have to turn another side stretcher to be as close to the one that I've already turned. Talk about challenging work since I've not been doing any real turning for almost 7 years now.!

The good news is that I come off oncall duty in a few more hours and then I'll be a free man once more.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all!!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Ellis Walentine

I hope... *LINK*

Ellis Walentine

... your doctor gets rid of that pooch before you deliver the repaired chew toy, er, chair, to him. Maybe he could tape a couple mouse traps to those stretchers to teach the little cur a lesson. :)

Normal busy weekend here at HQ. I'm trying to get ready for my big sale on the 14th. I priced a couple hundred woodworking books and started moving piles of junk away from the planer and pin router in my barn basement. I also presided over some serious brush-hogging to make room for folks to park.

Other than that, we attended our local World Tai Chi Day event in nearby Allentown. I enjoy doing tai chi to restore some equilibrium when life gets hectic. It'll probably keep me alive longer, too, if I keep at it.

Ellis


http://www.medicaldaily.com/tai-chi-health-benefits-250-million-people-know-whats-good-them-246916

Re: WC Weekend Accomplishments....

#3

Jesper, Denmark

Re: New beginnings......

Jesper, Denmark

My bid on a condo in midtown Slagelse was accepted on my 72nd birthday this wekend, so in a few months, moving from a house with a 1000 sq.ft. shop in the boondocks to a 2nd floor apartment will be a big change. All the amenities of the city within walking distance, but no workshop. I'll have to find some shop space close by to rent.

Re: WC Weekend Accomplishments....

#4

Re: New beginnings......

Hank Knight

I guess that's a good thing, Jesper. I'm sure you wouldn't give up your shop without good reason and careful thought. I hope you have good luck finding shop space in the city, and I wish you well with the change.

Re: WC Weekend Accomplishments....

#5

Lumber sort, Cherry stickered, and organize *LINK*

Grant in Iowa

Lots of work this weekend at my place. Milled some very nice cherry LAST weekend, but with the rain and things going on, I didn't get it stickered and stacked until this Friday evening. My lovely wife is a trooper, and she was on the other end of every board. Took lots of photos of the process for sharing (more on that at a later date).

Spent several evenings last week sorting and organizing the lumber racks IN the shop. Found lots of stuff I didn't remember having. Made room to bring in another stack of lumber which has been stickered for three years now.

The lumber sort allowed me to install a pallet rack I bought. This will enable me to store tractor implements inside where they ought to be.

All in all a big work weekend. I am very satisfied with the result.

Link is to Flickr album on micrologging. Included is the log arch concept, milling, and stickering and stacking lumber. I still need to make comments to the latter two parts, but at least you can look at the photos.

Regards,

Grant in Iowa


Micrologging

Re: WC Weekend Accomplishments....

#6

Re: Lumber sort, Cherry stickered, and organize

William Duffield

I have a micrologging question. In a couple of your photos, you show the sawing of a log with a rectangular section already removed from the middle of the log. In my limited experience, I've never seen anyone do that. Was that done to remove a piece of metal or rock that you had pre-detected in the log, or is it the work of a particularly nerdish woodpecker? ;) I guess decide later whether you are going to need shorter, wider boards or longer, narrower boards.

Re: WC Weekend Accomplishments....

#7

Re: Lumber sort, Cherry stickered, and organize

Grant in Iowa

William,

I was trying to make a garden bench.

Just kidding. You can also see that there is a sort of metallic gray tint to the wood in that square spot. This coloring is due to the metal, and is evident immediately around the area, but did not travel lengthwise in the tree. Oak and some others will have blue or gray splotches on the ends of the log if they have metal in them, but apparently not with Cherry.

This hole is where we removed a metal bracket someone had installed on the tree about 30 years prior. It was a heavy angle iron bracket, we think to hang deer being cleaned. The tree had overgrown the angle iron by about 4 inches, so it couldn't simply be unscrewed and removed. I got out my trusty Stihl MS180 small chainsaw and cut out the offending iron lag bolts and all. Once that was removed, the log could be safely milled.

Some would have rejected the long and perhaps even the entire tree, but since my sawyer runs a band mill, so long as I agree to buy the blades if he hits metal, he is good with cutting questionable logs. The log was the Butt log and therefore had some of the best lumber, so it was worth the time to cut the metal out.. ~26" diameter on the small end.

In Eastern Iowa, cherry rarely gets much bigger than this size before it begins hollowing out in the center and goes in to decline. When deciding if the tree needed to come down, I worked with the land owner and probed the lower part of the tree with a long drill bit and did find that it was hollowing, The stump had about a 6" diameter hollow in its center.

Regards,

Grant in Iowa

Re: WC Weekend Accomplishments....

#8

Re: Lumber sort, Cherry stickered, and organize

William Duffield

Good save!

There was a sawyer I used to visit for teak and other boat building woods who had a large walnut slab attached to the wall up and behind his desk. Right in the middle of it was exposed most of a large ceramic insulator and the 8" lag bolt that had attached it to the tree, which his circular saw mill "found." Evidently, there was no clue of its existence on the outside of the log, or even on the prior cut.

Re: WC Weekend Accomplishments....

#9

Re: Lumber sort, Cherry stickered, and organize

John K Jordan

Very nice log! I have a Woodmizer behind the barn and know very well the "zzzzz" sound of blade on steel or ceramic insulator hidden deep in the wood, missed by my metal detector. Yard trees and obvious fence lines are always suspect but even a tree from deep in the woods may have once been on a fence line.

JKJ