Scrollsawn Sanibel Egret
Dave Nichols
The pattern is in the Sept. 2007 issue of Creative Woodworks and Crafts. I used 1/8" Baltic birch for the fretwork and 1/4" plywood for the backing.
Knowledge You Can Build On — Est. 1998
Scrollsawn Sanibel Egret
Dave Nichols
The pattern is in the Sept. 2007 issue of Creative Woodworks and Crafts. I used 1/8" Baltic birch for the fretwork and 1/4" plywood for the backing.
Re: Scrollsawn Sanibel Egret
Charles Yawn
I like it!
Re: Scrollsawn Sanibel Egret
AZ in Colorado Springs
How long did you spend at the scroll saw? That's a nice piece.
Re: Scrollsawn Sanibel Egret
Dave Nichols
about 3 hours