Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Mattress/bed size question???

Posts

Mattress/bed size question???

#1

Mattress/bed size question???

Barry Irby

I am going to make a couple of beds for my grand daughters. Pretty much decided to make them Queen sized beds they can grow into. (They are 5 and 4)

I looked up Queen size mattresses on the net and they appear to be 60 X 80". Does anyone know if they are actually 60 X 80? Whatever they are, are they consistent brand to brand? Do you make the bed 60 x 80 or maybe 61 x 81 or whatever?

Re: Mattress/bed size question???

#2

Re: Mattress/bed size question???

Dick Coers

I've never seen one actually 60x80. All are undersized, but, how the heck do you measure something made like a pillow? I made the last one with inside dimension 61x81.

Re: Mattress/bed size question???

#3

Re: Mattress/bed size question???

David Bair

Made my daughter's 60x80 and the fit was perfect.

Re: Mattress/bed size question???

#4

Re: bed size

Mark Mandell - Gone Round In New Jersey

Have made several platform beds. The king was 80x80 and the queen was 60x80. Mattresses fit to the outside dimension, but wasn't so critical because weren't using box springs etm. for support.

Re: Mattress/bed size question???

#5

bed size Side note, platform

Barry Irby

My son and I built him a platform bed with drawers below. The Drawer fronts are walnut and cut form a single piece of wood to appear as a rail. The foam mattress overlaps the DF's and rests on them. Moving around on the bed causes the drawers to "squirm" open. To stop it he slips the mattress to one side so that the mattress does not touch them on one side and completely overhangs them on the other side an inch or two. Apparently the DF's are just enough taller than the frame to allow for a little push. Design error.

Re: Mattress/bed size question???

#6

Re: Mattress/bed size question???

Bruce, a MN Galoot

When I built our daughter's bed, we went to a furniture store and the salesman actually admitted that a box spring isn't necessary and that they're simply not used in Europe. I didn't look when we were in Italy, so I don't know about that.

I have built a half dozen frames and built them according to a comfortable height to sit on. I've never used a box spring.

Re: Mattress/bed size question???

#7

Re: Mattress/bed size question???

TomD

It isn't just Europe that didn't have them. When they came on the scene there was a lot of interest in making them so that they provide uniform support. Which is what you get from the floor anyway.

Re: Mattress/bed size question???

#8

Re: Get the mattresses first

TomD

Well maybe not, there could be a whole series of practicalities with that. But... It seems a constant with amateur projects that they don't buy the parts. Maybe in other cases than this one, they are not sure they will really finish that chopper project, so they don't buy wheels, front end or engine and trans, etc... But unless you are a pro and know where you are headed, without parts it is all a guessing game. So where possible buy the parts and build around them. Though one does need to take into account that in 20 years time, if one didn't build to some standard, there may not be a replacement part similar to the one one built to.