Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Help identifying wood

Posts

Help identifying wood

#1

Help identifying wood

Jay Lombardo


Wife picked up old table with the top in kinda rough shape. Sanded down fairly easily and is solid hardwood. I thought is was walnut but after sanding I don't think it is. Cherry? Sanded leaf has some mineral spirits wiped on one side in picture. the rest of the top is shown in the other photo in original state. Can anybody indentify the species? First time uploading pictures so if they don't come out right sorry.

Thanks

jay

Re: Help identifying wood

#2

Re: Little Help

Mark Mandell - Gone Round In New Jersey

If the bottom pic is showing what appears to be sap wood at the bottom edge, my guess would be cherry as well. Better images with close focus and even light would help.

Re: Help identifying wood

#3

Re: Help identifying wood

Jay Lombardo

I'm really bad at this but maybe these will be better.

Re: Help identifying wood

#5

Re: Help identifying wood

Jay Lombardo

Thank You

Re: Help identifying wood

#6

Ditto.  Cherry, and...

Grant in Iowa

Jay,

The bottom photo is definitely cherry. Keep in mind that cherry darkens significantly over time. Cherry is also known for not having significant pores like walnut does.

In contrast, walnut lightens over time to a point, and it is known to have visible pores and has a bit more of a coarse look to it. Woodworkers often fill these pores to achieve a smoother finish, which may be why some confuse one with the other on an older project.

Indeed, if used together in a project without stain, they will look very similar after around twenty years or so. That is until you notice the visible pores on the walnut. For this reason, walnut and cherry are not often paired together in projects. Most woodworkers tend to avoid combining smooth grain woods with coarse grain woods for aesthetic reasons.

FWIW,

Grant in Iowa