Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Joining quartersawn to flatsawn

Posts

Joining quartersawn to flatsawn

#1

Joining quartersawn to flatsawn

Gordy

I'm making drawers out of (flatsawn) maple sides and back. I'm half-blind dovetailing to the drawer fronts. I'd like to use quartersawn oak as the drawer front. But the maple will expand more than the quartersawn oak. I calculated up to a 1/32" difference over the 7" width of the drawer front. Should I abort and use flatsawn oak? I don't want my dovetail pins to crack.

Re: Joining quartersawn to flatsawn

#2

Re: Joining quartersawn to flatsawn

TomD

I probably wouldn't worry about it, for one thing the fronts will get a lot more exposure to the elements than the sides. It depends on where you live; where you might move; and how you keep your house; and what kind drawer you are making, in some cases you might have seasonal problems with those drawer sides; how tall the drawers are, the relative thickness of the parts...

Re: Joining quartersawn to flatsawn

#3

Re: Joining quartersawn to flatsawn

Bill Tindall, E.Tn.

It is unclear what calculation you did to come up with the value you are concerned with. In any case it is not something I would worry about.

Re: Joining quartersawn to flatsawn

#4

Re: Joining quartersawn to flatsawn

Keith Newton


I'm not sure what it would take for this to happen.

Will this piece live in a controlled atmosphere, or do you live somewhere that requires no heater or AC? If it is going to live in a controlled atmosphere, and your wood starts out around 6-8% MC, then it shouldn't experience any change, unless your plumbing breaks while you are off on vacation.

Also, since dovetails are such a good mechanical joint, there isn't much stress on glue joints.

The fronts will experience more change than the sides, since they are enclosed inside the carcass, with their own mini-atmosphere, so I would say going with the QS would be the best choice.