Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Wood ID Help

Posts

Wood ID Help

#1

Wood ID Help

TomD

My wife recently spotted some wood in a tip. After ensuring they really wanted rid of it we brought some of it home. One piece was a perfect large plank of a wood all but identical to real Mahogany, though the exact density of maple. I assume it is one of these new species popular for decking. I am making some stringed instruments out of it, but was wondering what the heck it is.

The partial guitar neck is real mahogany, the type fine furniture used to be made of, the kind they are always threatening to CITES list. to the right is the wood I want IDd. Both of these surfaces are pretty oxydized, the side view of the target species shows typical freshly cut colouring, and that is also exactly what mahogany looks like freshly cut. It works like mahogany also, though it is harder and heavier. Maybe a little more likely to leave you with a splinter. It bends well with heat.



Re: Wood ID Help

#2

Re: Wood ID Help

John Veerkamp

Could be Tiger Wood (Goncalo Alves)

Re: Wood ID Help

#3

Re: Wood ID Help

TomD

Maybe massarambuda:


Uses include the source of gutta percha/balata, violin bows, and they are slaughtering it for decking. Weight is about41 pounds/cubic foot, which is pretty near what my sample is.

Re: Wood ID Help

#4

Ellis Walentine

Re: Wood ID Help

Ellis Walentine

I don't know massarambuda, but your specimen closely resembles the Spanish cedar I've used for exterior millwork. It fits the description, and while 41 lbs/cu ft is probably at the high end, there's enough variability in the wood. The fact that it oxidizes at the same rate as mahogany tells me it probably isn't meranti, and the grain doesn't resemble species sold as African mahogany.

Does it have a slightly fragrant or spicy aroma when machined?

Ellis

Re: Wood ID Help

#5

The Forest Products Laboratory....

Brian Roberts

in Madison, WI does wood identification....five per household per year for free.

http://www.fpl.fs.fed.us/research/centers/woodanatomy/wood_idfactsheet.php

Re: Wood ID Help

#6

sapele wood  ??

del schisler

i have some and it look's just like that wood you have , send a sample to the lab.

Re: Wood ID Help

#7

Re: Wood ID Help

Keith Newton

Have you looked up Andiroba? It may be good match, or Sapele.

Re: Wood ID Help

#8

Re: Wood ID Help

TomD

Thanks Ellis I did resaw it, and I don't remember a pleasing or spicy aroma.

Re: Wood ID Help

#9

Re: The Forest Products Laboratory....

TomD

That's a great service. I'd have to hire a coyote to get it over the border first! And to boot, I am not sure my need is that great. I am quite impressed with the wood, and would be interested in getting more, though the choice is so vast maybe the real take away is to just look into these species a little more than I have so far.

Re: Wood ID Help

#10

Re: sapele wood  ??

TomD

Sapele does look like a good bet. It is dead on for density, and Taylor makes guitars out of it. Some of the species that looked a good match had characteristics that are not ideal for guitars, but this stuff was firing on all cylinders from the moment I touched it, so that would make sense. We rescued it from a stack where it had been in the weather for a long time, and it still machined like a champ. So it was hard to believe it was one of the deck woods that needs care drying, splits, and is subject to considerable dimensional change.