I recently completed a wooden tractor. It is a 1/16 scale John Deere Model "A", circa 1946 - 1949. It is completely made of wood, and contains no nails, or screws. I made everything except the headlights, front wheels and the steering wheel. It is made of maple, cherry, and walnut, and the finish is a clear coating. Attached are a couple of "in process" pics and some shots of the completed tractor.
It is meant to be a model, and will go on my shelf with other farm toys I have built. Details, Details, Details, that is what makes it so realistic. There are 80 separate tread pieces in the two rear tires.
This post isn't meant to detract from your fine work. That is a beautiful piece. Well done. It just reminded me of something I wish I had taken a picture of. I met a retired finish carpenter a few years ago and visited his home. He showed me a bulldozer he built. It was about eight inches long.The tracks were functional. Each piece of track was a separate piece of wood.Held together with tiny wooden pins .The bucket lifted with a lever. There must have been a thousand separate tiny pieces of wood in that thing. It was amazing. Must have taken alot of hours to create.
I'm reminded of when I made my 'totems'. The family thought I meant totem pole, actually what I made was 3 times scale pieces of my dovetail saw, my favorite chisel and a fully functional sliding bevel gauge. They are all mounted together standing upright on a platter. Increasing dimensions was a new puzzle to work through.